Axxess AXAC-FDSTK Bruksanvisning


Läs gratis den bruksanvisning för Axxess AXAC-FDSTK (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2.5 recensioner. Har du en fråga om Axxess AXAC-FDSTK eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
AXAC-FDSTK
INSTALL ATION IN STRUCTIONS
REV. 2/4/20
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
Ford (w/ 4.2-inch screen) 2014-Up
FEATURES
“Plug & Play” supplemental harness for the AXAC-FD1 harness and AXAC-1
display screen models.
TOOLS REQUIRED
• Panel removal tool • 9/32” Socket wrench
INSTALLATION
The AXAC-FDSTK will connect at the turn signal indicator in the steering column.
There are two different harnesses that Ford uses with different models. Use the
harness that connects to the turn signal indicator and discard the other.
1. Remove (2) 9/32” screws underneath the steering column shroud.
2. Place the steering column in the downward position. Turn the steering
wheel slightly to the right to access the front of the shroud. Using a panel
tool, pry and release the right side of the shroud. Once complete, do the
same for the opposite side.
3. Slide the shroud slightly forward, then remove.
4. Unplug the turn signal indicator harness, then insert the AXAC-FDSTK
harness in between. (Figure A)
5. Route the (2) bare wires to the AXAC-FD1 harness.
CONNECTIONS
From the harness to the AXAC-FDSTK AXAC-FD1 harness,
connect together the following wires:
Blue/Black to Blue/Black
to Blue/Red Blue/Red
Visit AxxessInterfaces.com for more detailed information about the product
and up-to-date vehicle specific applications
(Figure A)


Produktspecifikationer

Varumärke: Axxess
Kategori: ej kategoriserat
Modell: AXAC-FDSTK

Behöver du hjälp?

Om du behöver hjälp med Axxess AXAC-FDSTK ställ en fråga nedan och andra användare kommer att svara dig