Axxess AXSWCH-FD1 Bruksanvisning


Läs gratis den bruksanvisning för Axxess AXSWCH-FD1 (4 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3 recensioner. Har du en fråga om Axxess AXSWCH-FD1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
AXSWCH-FD1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/19/25 INSTAXSWCH-FD1
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
NOTE: Refer to the instructions included with
the aftermarket radio.
INTERFACE FEATURES
• Pre-wired AXSWC harness (AXSWC sold separately)
• Designed for SYNC
®
systems when removing 4.3” screen
• Retains factory backup camera
INTERFACE COMPONENTS
• AXSWCH-FD1 harness
• AXSWC interface (sold separately)
APPLICATIONS
TOOLS REQUIRED
• Wire cutter
Crimp tool and connectors
(example: butt-connectors, bell caps, etc.)
or
• Solder gun, solder, and heat shrink
• Tape
• Zip-ties
TABLE OF CONTENTS
Connections ............................................................2
Steering Wheel Control Harness
Fits Select Ford Models 2013-2019
Visit AxxessInterfaces.com for more detailed information about the product and
up-to-date vehicle specific applications
Ford
Escape ........................................................2013-2015
Transit ........................................................2015-2019


Produktspecifikationer

Varumärke: Axxess
Kategori: ej kategoriserat
Modell: AXSWCH-FD1

Behöver du hjälp?

Om du behöver hjälp med Axxess AXSWCH-FD1 ställ en fråga nedan och andra användare kommer att svara dig