BBB BottomThread BBO-39SR Bruksanvisning

Läs gratis den bruksanvisning för BBB BottomThread BBO-39SR (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om BBB BottomThread BBO-39SR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

ABC

DEG

F

IMPORTANT:

- Before installing ensure the BB shell

①

is clean and free of

metal chips, dirt and excess paint.

- Inspect the BB shell

①

for width, inner diameter, ovalization or

anything that could cause bearing mis-alignment.

- Always use a calibrated torque wrench to tighten crank bolts.

- BBB Cycling cannot guarantee compatibility with you frame

and/or crank combination.

consult your manufacturer for compatibility.

- BBB Cycling cannot be held responsible for any damage

occured during assembly

.

BBB has no responsibility for misprints or changed technical content.

ENDEFRNLESPT MANUAL / HANDBUCH / MANUEL / HANDLEIDING / MANUAL / MANUAL /

ITHUPLCZ MANUALE / HASZNÁLATI UTASÍTÁS / PODRĘCZNIK / UŽIVATELSKÁ PŘÍRUČKA

/ MANUÁL / JP使用説明書/RUРУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ / SKNOHÅNDBOK

BBB CYCLING.COM

ROO SEVELTSTRAAT 46, 2321 BM

LEIDEN. THE NETHERLANDS

BOTTOMTHREAD

/BBO-39SR

BOTTOM BRACKET

INSTALLATION:

A. Ensure sure the BB shell

①

is clean and free of metal chips, dirt and excess paint.

B. Apply a little bit of grease on the edges of the plastic sleeve

②

Do not use PTFE, anti-seize or

thread locking compound.

C. Add spacers

⑤

as noted below. If binding occurs or the crankset gets loose over time, try removing spacers.

D. First insert the drive side cup

③

then insert non-drive side cup

④

, until the threads engage.

Make sure you do not cross-threads the cups and that the plastic sleeve

②

is properly seated.

E. Use the BracketGrip cup tools to tighten until the lip of the cups are flush against the BB shell

①

(Max. 40Nm).

F. Apply grease to the surfaces of the spindle that will contact the bearings.

G. Install crankset following manufacturers specifications.

- BTL-27L BracketGrip

- Torque wrench

- Caliper or ruler

- Grease

RECOMMENDED TOOLS

IncludedNot Included

COMPONENTS:

3

2

1

Bottom bracket shell

Plastic sleeve (x1)

Drive side cup (x1)

5

4

Non-drive side cup (x1)

Spacers (2.5 x2)

COMPATIBILITY

BSA 68/73mm + Ø24-22mm stepped spindle cranksets

CRANKBB SHELL

WIDTH

NONDRIVE SIDE -

SPACER

DRIVE SIDE

SPACER

Road6800

MTB682.5 mm2.5 mm

MTB7300

1

2

3

5

45

Max.

40Nm

WARNING

Sold only by professional bicycle dealers.

For proper installation, ask your BBB dealer.

Not following the instructions in this manual

may cause damage to the product not covered

under warranty, damage to the bicycle, or

cause an accident resulting in injury or death.

FIND YOUR TRANSLATION

ON BBBCYCLING.COM

Produktspecifikationer