Bixolon SRP-350plusV Bruksanvisning

Bixolon Inte kategoriserad SRP-350plusV

Läs gratis den bruksanvisning för Bixolon SRP-350plusV (43 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 4.5 recensioner. Har du en fråga om Bixolon SRP-350plusV eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/43

◈ Information

This installation guide contains essential information required for product

installation. Please refer to the Software on the Download section of the

BIXOLON website (www.bixolon.com) for further information.

1. Manual: User’s Manual, Code Table, Control Commands, Software manuals

2. Driver: Windows, OPOS, CUPS(Linux, Mac), VCOM(USB, Ethernet)

3. SDK: UPOS SDK(iOS)

4. Utility: Unified POS Utility, Net Configuration Tool, Android Utility, iOS Utility

BIXOLON maintains an ongoing effort to enhance and upgrade the functions

and quality of all its products. In following, product specifications and/or user

manual content may be changed without prior notice.

Please refer to the BIXOLON website for the addresses and phone numbers of

the company's headquarters and branch offices.

◈ Components

SRP-350/352plusV

Cable Cover

USB A-B Cable

Paper

AC/DC Adapter

Power Cord

DK Gender

Installation Guide

◈ Cable Connection

1. Turn off the printer and peripheral devices.

2. Connect the power cord to the adapter and connect the adapter to the power

supply connector of the printer.

3. Check the type of the interfaces at the back of the printer (USB, Serial,

Parallel, Ethernet, Powered USB, Wireless LAN and Bluetooth) and connect

the interface cable.

4. Connect the drawer kick-out cable to the drawer kick-out port located on the

underside of the printer.

Do not use an adapter that was not supplied with the printer.

◈ Installing Paper Roll

1. Push the Cover Open Button to open the

Printer Cover.

2. Insert new roll paper in the correct

direction.

3. Pull the paper out slightly and close the

Printer Cover.

When closing the cover, press down on the center of the cover

to ensure that the paper is in contact with the roller. Printing

quality may not be optimum if recommended paper is not

used.

◈ Using Control Panel

• Power (LED)

The Power LED is on whenever the printer is on.

• Error (LED)

Red light will be on in various error conditions such as out of

paper, cover open, etc.

• Paper (LED)

Red LED will be lit when the paper roll is running low.

The LED keeps blinking when the printer is in self-test

standby mode or macro execution standby mode.

• Feed (Button)

Press this button to feed the paper out.

Hold down this button to feed out the paper continuously.

◈ Self-Test

The printer’s functionality can be checked through the self-test. Printing

quality, ROM version, and memory switch settings can be checked through the

self-test function.

1. Check whether paper is inserted correctly.

2. Turn on the power while holding down the Feed button and the self-test

procedure will begin.

3. The printer will print out details of its current status including which version

of ROM.

4. After printing out its current status of printer, the printer will print following

lines and wait for the next step (paper light will keep blinking).

SELECT MODES BY PRESSING FEED BUTTON.

Continuous SELF-TEST : Less than 1 second

VMSM Selection : 1 second or more

5. Press the Feed button to resume printing or hold down the button for at

least one second to change the VMSM settings.

5-1 If “Continuous “Self-Test” is selected

(1) Press the Feed button for less than one second to print the preset page.

(2) The self test ends automatically as it prints the following line and cuts

the paper.

*** COMPLETED ***

(3) The printer goes into normal print mode upon completion of the self

test.

5-2 If “VMSM Selection” is selected

(1) The following lines will be printed when the VMSM opens.

** VMSM Selection **

0 : Exit and reboot printer

1 : Print current settings

2 : Set Print Density

3 : Set Print Speed

4 : Set Cutting mode

5 : Buzzer Setting

6 : Set Serial Setting

(2) Press the Feed button to run the above function.

▶ Step 1(Select Options): press the button a number of times as shown

by each menu.

▶ Step 2(Enter Options): hold down the button for at least one second

to apply each item selected.

If a selected item is not listed above, the list of “VMSM Selection”

will be printed again. Setting the mode will be canceled if no item

is selected in Step 1.

If “0: Exit and reboot printer” is not executed, the new settings

will not be saved.

(3) Hold down the Feed button for at least 1 second to save the changes.

The following line will be printed before cutting the paper.

*** COMPLETED ***

6. The new settings will be automatically applied when printer resets.

Printer Installation Guide & Safety Guide

KN04-00241A (V1.03)

THERMAL PRINTER SRP-350/352plusV

Power Cord

Ethernet

Cable

Interface Cable

(Serial/Parallel/Powered USB/

Wireless LAN/Bluetooth)

Adapter

Drawer Kick-out

Port

Power Cable

Interface port

USB

Cable

Drawer Kick-out

Cable

Ethernet Port

USB Port

Power Port

◈ Recommended Papers

- TF50KS-E (Paper Thickness: 65μm): Nippon Paper Industries Co., Ltd.

- PD 150R (Paper Thickness: 75μm): New Oji Paper Mfg, Co., Ltd.

- PD 160R (Paper Thickness: 75μm): New Oji Paper Mfg, Co., Ltd.

- P350 (Paper Thickness: 62μm): Kansaki Specialty Paper, Inc. (USA)

- P220AG (Paper Thickness: 65μm): Mitsubishi Paper Mills Limited

- P220A (Paper Thickness: 65μm): Mitsubishi Paper Mills Limited

- F5041 (Paper Thickness: 65μm): Mitsubishi HitecPaper Flensburg Gmbh

- P5047 (Paper Thickness: 60μm): Mitsubishi Paper Mills Limited

The use of papers other than those recommended above may

cause damage to the printer’s TPH or degrade the printing

quality. BIXOLON is not responsible for the damage caused by

non-recommended papers.

◈ WEEE(Waste Electrical and Electronic Equipment)

This marking shown on the product or its literature, indicates that is should not

be disposed with other household wastes at the end of its working life, To

prevent possible harm to the environment or human health from uncontrolled

waste disposal, please separate this item from other types of wastes and recycle

it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this

product, or their local government office, for details of where and how they can

take this item for environmentally safe recycling. Business users should contact

their supplier and check the terms and conditions of the purchase contract. This

product should not be mixed with other commercial wastes for disposal.

◈ WARNING & CAUTION

Is described as death, physical injuries, serious financial losses,

and damage to data etc. that can be caused to the user.

Do not connect multiple products to a single

or faulty power outlet.

Use only grounded power outlets that meet

the industry standard. Noncompliance may

cause electric shock or fire.

Only use authentic products from BIXOLON.

The company will not provide post-sale

support for damaged or other quality

issues that any fake (or refurbished)

products may incur.

Do not excessively bend or strain the power cord.

Securely push the power cord all the way into the

power outlet lest it remain loose. Make sure to

hold the cord tight when separating it from the

power outlet. Do not remove the power cord

while the product is in use. Noncompliance may

cause electric shock or fire.

Keep small accessories or other packaging materials away

from young children. Beware: choking hazard.

Mishandling the product may incur injuries which

may require seeking urgent medical attention.

Keep excessive liquids away from the power

cord and outlet. If matter is smeared onto

the power cords, wipe with a dry cloth.

Noncompliance may cause electric shock

or fire.

Do not allow the product to be

damaged by heavy objects.

Noncompliance may cause electric

shock or fire.

If the product emits a strange sound, burning smell,

or smoke, turn off the power immediately and unplug

the power cord. If the product is dropped or its

exterior is damaged, turn off the power immediately

and unplug the power cord. Do not subject the

product to shock. It may start a fire. It may

damage the product.

Install the product in a well-ventilated area by keeping it a certain

distance from the wall. The product installed in certain places such

as where a lot of fine dust is generated, where the temperature is

too high or too low, where there is a lot of moisture or water, and at

airports or stations that are used continuously for a long time may

suffer serious quality problems due to the influence of the

surrounding environment. An increase in internal temperature

may start a fire. Be sure to contact the place of purchase before

installing the product.

Install the product in a fixed place preventing it

from tipping over. When moving the product,

turn off the power and disconnect all connected

cables, including the power cord. It may

damage the product.

Never independently disassemble,

repair, or modify the product as the

warranty will become invalid.

When repair is necessary, contact

the original place of purchase.

Do not let any foreign substances

enter the product. Do not place heavy

objects, liquids, or metals on the

product. This could cause damage to

the product or a fire.

If there is a problem with the product,

please contact the original place of

purchase or through BIXOLON

website’s product repair page

(www.bixolon.com).

◈

(www.bixolon.co.kr)

1. : , , ,

2. (Driver): Windows, OPOS, JavaPOS, CUPS(Linux, Mac),

(USB Ethernet )

3. (SDK): UPOS SDK(iOS, Android)

4. (Utility): POS (Unified POS Utility),

(Net Configuration Tool), (Android Utility), iOS

(iOS Utility)

( ) .

◈

SRP-350/352plusV

USB A-B

AC/DC

◈

1. .

2. , .

3. (USB, , , , Powered USB,

, ) , .

4. .

◈

1. .

2. .

3. , .

. ( )

◈

• ( )

, .

• ( )

. .

SELF TEST .

• ( )

◈ Self-Test

, ROM , .

1. .

2. . .

3. ROM .

4. , .

( .)

SELF-TEST PRINTING.

1 .

5-1 “ ”

(1) 1 .

(2) .

*** COMPLETED ***

(3) .

5-2 “ ”

(1) .

Korean

SRP-350/352plusV

( / /Powered USB/

/ )

USB

Produktspecifikationer

Varumärke:	Bixolon
Kategori:	Inte kategoriserad
Modell:	SRP-350plusV
Inbyggd display:	Nej
Vikt:	1600 g
Bredd:	145 mm
Djup:	200 mm
Höjd:	146 mm
Färg:	Nej
Mobila operativsystem som stöds:	Android, iOS
Maximal upplösning:	180 x 180 DPI
Internminne:	- MB
Modell:	POS-skrivare
Maximal rulldiameter:	79.5 mm
Valfri anslutning:	Bluetooth, Ethernet, USB 2.0, Wireless LAN
Skrivhastighet:	400 mm/sek
Skrivhuvudets livslängd:	200 km
Produktens färg:	Svart
Windows-operativsystem som stöds:	Ja
Temperatur vid drift:	0 - 40 ° C
Temperaturintervall (förvaring):	-20 - 60 ° C
Intervall för relativ operativ luftfuktighet:	10 - 80 %
Fuktighet (förvaring):	10 - 90 %
AC-inspänning:	100 - 240 V
Anslutningsteknologi:	Kabel
Nätverksansluten (Ethernet):	Ja
Strömkälla av typen:	AC
Växelström Frekvens:	50 / 60 hz
Antal USB 2.0 anslutningar:	1
USB-port:	Ja
Mac-kompatibel:	Ja
Utskriftsteknologi:	direkt termal
Skärare:	Ja
Automatisk sax hållbarhet:	2 miljoner skär
Utskriftstecken:	Text
Typ av pappersmatning:	Övre och främre
Rulle kärndiameter (max):	79.5 mm