Blebox dimmerBox Bruksanvisning
Blebox
Smarth hem
dimmerBox
Läs gratis den bruksanvisning för Blebox dimmerBox (2 sidor) i kategorin Smarth hem. Guiden har ansetts hjälpsam av 32 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 16.5 recensioner. Har du en fråga om Blebox dimmerBox eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
The device requires pre-conguration! After the rst start, select
the type of light source controlled. The incorrect selection can
cause irreparable damage to the controller and to light source.
It is forbidden to connect dierent types of light sources to the
controlled circuit as well as to change the load type with the
connected controller.
After clicking on the device name, a window will appear informing you that
you need to select the type of load (the type of lighting that the dimmerBox
will control). Go to “Settings” (icon at the top-right corner of the screen) and
select the appropriate option in the "Load Type" box.
Remember that choosing the wrong option it can cause permanently
damage to the controller and to the light source!
If you change the load type in the future, e.g. by replacing the traditional
bulbs with LEDs, rst select the load type for "None", remove old bulbs, add
new ones and in the next step change the load type to "LED bulb". Never add
to controlled circuit, dierent types of load, e.g. a traditional bulb and a LED
bulbs, or selecting the wrong load type.
After saving the settings, go to the main panel by clicking the arrow top-left
corner of the screen. Test the controller by moving the scrollbar several times
in extreme and intermediate positions - the light source should change its
brightness.
If you have connected a wall push-button, go to the settings and then in the
"Buttons" option select the type of mounted push-button - with a single
button or two buttons. Then check its work. For a single-button, a single click
will cause that the light will switch on and switch o accordingly. Holding the
push-button generates an increase in the brightness of the light source or its
attenuation. For a button with two buttons, one of the buttons is forswitch o
(single click) or dimming (hold down) while the other is for turn on increase
the intensity of the light source.
TURN ON / OFF AND DIMM 230V LIGHTING FROM ANY PLACE IN THE WORLD
Disconnect theinstallation supply voltage before installing the controller.
Remember that any mounting works should be carried out when the mains
voltage is disconnected (switch o the mains fuse or disconnect the power
cord from the mains socket).
The controller should be installed in a place protected against adverse
environmental conditions, protected from third party access - in the ush box
or inside the enclosure of the controlled device. Remember that metallic
elements (wires, housing parts) have a negative inuence on the range of the
device, and consequently the comfort of use. It is recommended that the
device be mounted in a stable and xed position. Due to the operating
voltage of the device it is necessary that the connectors of the controller be
protected against accidental contacts or short circuits, which could cause
electric shock or damage to the device.
1
Download the free wBox application. If you have an Android mobile device,
you will nd the application in the Play Store. For iOS devices the application
is in the App Store.
By using your mobile phone or tablet, connect it to the device wireless
network. To do this, enter to your smartphone or tablet settings, then go to
setting of the WiFi network and nd the network name „dimmerBox-
-xxxxxxxxxx” where xxxxxxxxxx is the serial number of the device. Connect to
this network.
Turn on the wBox application. A device will appear at the top of the screen. To
add it to the application, click on "plus" on the right side of the name. To
pre-congure the controller, click on the default device name.
2 FIRST START
You can also set the conguration using the web browser
of your phone / tablet. After connecting to the wireless
network of the controller, turn on the browser and go
website www.blebox.eu
brightness controller for 230v lighting
with μWiFi technology
CONNECTION DIAGRAM
light source
INSTALLATION - BASICS
User manual
SAFETY RULES
Read the diagram and then proceed to install the controller. Pay particular
attention to the designation of the controller connectors. Start with power
wires - phase L (usuallybrown) and neutral N (blue). Then, connect the load. If
you only want a local control with a wall switch, connect the wall push-button
according to the diagram. To control using only your phone or Tablet, it is not
necessary to install the wall push-button.
The controller supports all types of double monostable push-button. The order
of connection of the S1 / S2 input, to the right / left push-button does not
matter at the installation stage - it can be set at a later stage of the controller
conguration.
After making sure that the device is connected in accordance with the diagram
and that there are no metal components near the controllerwhich may
accidentally cause short-circuit, start the device by turning on the power
(turning on the mains fuse or connecting the power cord to the power outlet).
N
L
Connect only in accordance with the diagram presented in the
manual. Improper connections may be dangerous, it can damage
the controller, and loss of the warranty.
Do not connect the device to loads exceeding the permitted
values.
Using dimmerBox with magnetic low-voltage (MLV) transformers
is strictly forbidden and can cause a device damage and risk of
re.
The installation of the device to a power mains that does not
meet the quality requirements dened by PN-EN 50160, will
result in the loss of the warranty.
DANGER!: Risk of electric shock! Even with the device turned o,
the outputs may be live. All assembly work should be ALWAYS
performed with the disconnected power circuit.
Produktspecifikationer
| Varumärke: | Blebox |
| Kategori: | Smarth hem |
| Modell: | dimmerBox |
Behöver du hjälp?
Om du behöver hjälp med Blebox dimmerBox ställ en fråga nedan och andra användare kommer att svara dig
Smarth hem Blebox Manualer
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Smarth hem Manualer
- FireAngel
- Niko
- Nexa
- Livoo
- Trevi
- Burg-Wachter
- Qnect
- Oregon Scientific
- Honeywell
- Caliber
- Reolink
- Renkforce
- Blumfeldt
- Chuango
- Elro
Nyaste Smarth hem Manualer
29 Mars 2025
29 Mars 2025
29 Mars 2025
27 Mars 2025
18 Mars 2025
18 Mars 2025
12 Mars 2025
26 Februari 2025
19 Februari 2025
18 Februari 2025