Blebox SwitchBox Bruksanvisning
Blebox
Smarth hem
SwitchBox
Läs gratis den bruksanvisning för Blebox SwitchBox (2 sidor) i kategorin Smarth hem. Guiden har ansetts hjälpsam av 34 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 17.5 recensioner. Har du en fråga om Blebox SwitchBox eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Test the work of the controller, by clicking the ON / OFF button, paying
attention to the behavior of the connected load. If you have connected a wall
push-button, check its work.
In the default conguration of the controller, for a mono-stable push-button,
holding down the push-button should cause that the load turn on, releasing
the pushbutton will turn o the load. To change this behavior, go to the
settings (button at the top-right corner of the screen) and then select "Set
actions triggered by input", for the corresponding action select the appropria-
te action type for the given trigger. You can congure 10 actions for a
push-button. For example, to switch on / o the lighting each time you press
the button, select the action type as "toggle state" and as trigger select “short
click”.
Also check the selection in the "state after restart" option, which determines
how the controller behaves after a restart caused by, for example, a power
failure. You can choose whether the load should be on, o, remain as before
the restart (if it was o then it has to continue o), or take the opposite state.
CONTROL DEVICES FROM ANY PLACE IN THE WORLD
Disconnect theinstallation supply voltage before installing the controller.
Remember that any mounting works should be carried out when the mains
voltage is disconnected (switch o the mains fuse or disconnect the power
cord from the mains socket).
The controller should be installed in a place protected against adverse
environmental conditions, protected from third party access - in the ush box
or inside the enclosure of the controlled device. Remember that metallic
elements (wires, housing parts) have a negative inuence on the range of the
device, and consequently the comfort of use. It is recommended that the
device be mounted in a stable and xed position. Due to the operating
voltage of the device it is necessary that the connectors of the controller be
protected against accidental contacts or short circuits, which could cause
electric shock or damage to the device.
1
Unlock your phone or tablet and download the free wBox application. If you
have an Android mobile device, you will nd the application in the Play Store.
For iOS devices the application is in the App Store. For phones with Windows
Phone, you can download the application from the Windows Phone Store.
By using your mobile phone or tablet, connect it to the device wireless
network. To do this, enter to your smartphone or tablet settings, then go to
setting of the WiFi network and nd the network name „switchBox-
-xxxxxxxxxx” where xxxxxxxxxx is the serial number of the device. Connect to
this network.
Turn on the wBox application. A device will appear at the top of the screen. To
add it to the application, click on "plus" on the right side of the name. To
pre-congure the controller, click on the default device name.
2
You can also set the conguration using the web browser
of your phone / tablet. After connecting to the wireless
network of the controller, turn on the browser and go to:
http://192.168.4.1
Read the diagram and then proceed to install the controller. Pay particular
attention to the designation of the controller connectors. Start with power
wires - phase L (usuallybrown) and neutral N (blue). Then, connect the load. If
you only want a local control with a wall switch, connect the wall push-button
according to the diagram. To control using only your phone or Tablet, it is not
necessary to install the wall push-button.
The controller supports all types of single mono-stable push-button.
After making sure that the device is connected in accordance with the
diagram and that there are no metal components near the controller which
may accidentally cause short-circuit, start the device by turning on the power
(turning on the mains fuse or connecting the power cord to the power outlet).
smart switch for electric devices
with μWiFi technology
CONNECTION DIAGRAM
INSTALLATION - BASICS
FIRST START
User manual
N
L
Device
switchBox
μWiFi AC wireless
switch controller
by blebox.eu
230V AC max 3500W
OUTL N IN
Connect only in accordance with the diagram presented in the
manual. Improper connections may be dangerous, it can damage
the controller, and loss of the warranty.
Do not connect the device to loads exceeding the permitted
values.
The installation of the device to a power mains that does not
meet the quality requirements dened by PN-EN 50160, will
result in the loss of the warranty.
DANGER!: Risk of electric shock! Even with the device turned o,
the outputs may be live. All assembly work should be ALWAYS
performed with the disconnected power circuit.
SAFETY RULES
EN
Produktspecifikationer
| Varumärke: | Blebox |
| Kategori: | Smarth hem |
| Modell: | SwitchBox |
Behöver du hjälp?
Om du behöver hjälp med Blebox SwitchBox ställ en fråga nedan och andra användare kommer att svara dig
Smarth hem Blebox Manualer
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Smarth hem Manualer
- Salus
- Casambi
- Fibaro
- Busch-Jaeger
- Laica
- Panasonic
- EQ-3
- Winland
- Intertechno
- Acer
- WiZ
- Livoo
- Renkforce
- Sanus
- LevelOne
Nyaste Smarth hem Manualer
29 Mars 2025
29 Mars 2025
29 Mars 2025
27 Mars 2025
18 Mars 2025
18 Mars 2025
12 Mars 2025
26 Februari 2025
19 Februari 2025
18 Februari 2025