Brother HAK100 Bruksanvisning

Brother Skrivare HAK100

Läs gratis den bruksanvisning för Brother HAK100 (60 sidor) i kategorin Skrivare. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3.5 recensioner. Har du en fråga om Brother HAK100 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/60

HAK 100

Before using this machine, be sure to read the Product Safety Guide.

We suggest that you read this User's Guide and keep it in a handy place

for future reference.

User’s Guide

Introduction

Important Notice

 The contents of this document and the specifications of this product are subject to change without notice.

 Unauthorised duplication or reproduction of any or all content of this document is prohibited.

 Brother reserves the right to make changes without notice in the specifications and materials contained

herein and shall not be responsible for any damages (including consequential) caused by reliance on the

materials presented, including but not limited to typographical and other errors relating to the publications.

 Please note that we cannot assume any responsibility for any damage or lost profit arising from the use of

this product or any content created by this product or the disappearance or change of data due to failure,

repair or supplies, or any claim from a third party.

 For servicing, adjustments or repairs, contact Brother customer service or your local Brother dealer.

 If the machine operates abnormally or any malfunction occurs, turn the machine off, disconnect the Power

Cable and contact Brother customer service or your local Brother dealer.

 Before using the machine, be sure to read all documents included with the machine for information about

safety and correct operation.

Table of Contents

1 General Information 1

1.1 Definitions of Notes ..........................................................................................................................1

1.2 Product Introduction .........................................................................................................................1

2 Part Names and Functions 2

2.1 Machine ............................................................................................................................................2

2.1.1 Front ........................................................................................................................................2

2.1.2 Rear.........................................................................................................................................3

2.2 Control Panel and LED Indicators ....................................................................................................4

3 Prepare the Machine 6

3.1 Unpack the Machine and Check the Components ...........................................................................6

3.2 Remove the Packing Materials.........................................................................................................7

3.3 Initial Setup.......................................................................................................................................9

3.3.1 Connect the Machine and Install the Feed Tray and the Foil Cartridge ..................................9

3.3.2 Select the LCD Language (Initial Power On Only) ................................................................11

3.4 Install the Foil Cartridge..................................................................................................................12

3.4.1 Load the Full-Width Foil Cartridge.........................................................................................12

3.4.2 Load the Half-Width Foil Cartridge ........................................................................................14

3.4.3 Remove the Foil Holder and Cartridge Assembly .................................................................16

4 Media Specifications 19

4.1 Acceptable Media ...........................................................................................................................19

4.2 Unacceptable Media.......................................................................................................................20

4.3 Other Specifications .......................................................................................................................21

4.3.1 Feed Tray Capacity ...............................................................................................................21

4.3.2 Top Margin Requirements to Avoid Paper Jams...................................................................21

5 Use the Machine 22

5.1 Transfer ..........................................................................................................................................22

5.2 To Transfer the Foil onto a Two-sided Sheet .................................................................................23

5.3 Load the Media...............................................................................................................................23

5.3.1 Load Standard-size Media ....................................................................................................24

5.3.2 Load Non-Standard-Size Media ............................................................................................26

6 Change Settings 27

6.1 Access the Main Menu ...................................................................................................................27

6.2 Menu Items.....................................................................................................................................28

6.3 Improve the Transfer Quality ..........................................................................................................29

6.3.1 Adjust the Transfer Temperature ..........................................................................................29

6.3.2 Change the Feed Speed .......................................................................................................30

6.4 Foil Save Mode...............................................................................................................................31

6.4.1 Transfer the Foil Only onto the Upper Part of the Sheet (Top) .............................................32

6.4.2 Transfer the Foil Only onto the Lower Part of the Sheet (Skip).............................................33

Produktspecifikationer

Varumärke:	Brother
Kategori:	Skrivare
Modell:	HAK100
Inbyggd display:	Ja
Vikt:	14500 g
Bredd:	342 mm
Djup:	330 mm
Höjd:	356 mm
Förpackningens bredd:	458 mm
Färg:	Ja
LED-indikatorer:	Cover lock, Error, Foil, Save
Snabbinstallationsguide:	Ja
Pappersfackets mediavikt:	90 - 350 g/m ^
Kontrolltyp:	Knappar
Låddjup:	410 mm
Vikt inkl. förpackning:	16900 g
Temperatur vid drift:	10 - 32 ° C
Temperaturintervall (förvaring):	0 - 40 ° C
Intervall för relativ operativ luftfuktighet:	20 - 80 %
Fuktighet (förvaring):	10 - 95 %
AC-inspänning:	220-240 V
Kabel inkluderad:	Energiljus
Växelström Frekvens:	50 / 60 hz
Displaytyp:	LCD
Färgdisplay:	Nej
Strömförbrukning i avslaget läge:	0.04 W
Skärmstorlek (HxB):	48 x 10.9 mm
Knappfunktion:	Clear/Back, Down, Favourite1, Favourite2, Foil save, Menu, Ok, Power on/off, Start, Stop/Exit, Temperature, Up
Medelströmförbrukning vid utskrift:	340 W
Total inmatningskapacitet:	44 ark
Total utmatningskapacitet:	44 ark
Pappersfackets typ av media:	Fancy paper, Plain paper, Recycled paper, Textured paper, Thick paper, Thin paper
Strömförbrukning (driftläge):	7 W
Bredd utskrivbart område:	215.9 mm