Chief HB75P Bruksanvisning
Chief
Projektor tillbehör
HB75P
Läs gratis den bruksanvisning för Chief HB75P (2 sidor) i kategorin Projektor tillbehör. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 7.5 recensioner. Har du en fråga om Chief HB75P eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
8803-002018 Rev01
©2011 Milestone AV Technologies,
a Duchossois Group Company
05/11
I N S T A L L A T I O N I N S T R U C T I O N S
Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation
or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-
pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this
document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
Continued. . .
MODEL: HB-75P Custom Projector Bracket
Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
PARTS
Figure 1
INSTALLATION
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened
to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
1. Lower custom HB bracket onto top of projector. Ensure that bracket front points toward front of projector. (See Figure 1)
2. Attach HB bracket to projector using five M6 x 20mm Phillips pan head screws, five M6 flat washers and five spacers through five holes
in the HB bracket. (See Figure 1)
(1) BRACKET, Custom HB (5) WASHER, Flat, M6
(4) NUT, Flange, Hex, 5/16-18 (5) SCREW, Phillips Pan Head, M6 x 20mm
(5) SPACER, .750 x .250 x. 250
Front
1
2
x 5
I N S T A L L A T I O N I N S T R U C T I O N S
Continued . .
CAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical installations. A third assistant is
recommended.
Figure 2
3. Attach VCM housing to your method of support and tighten firmly so the VCM housing is square to the screen.
4. With help of assistants, lift the projector and install it to the four studs extending from the VCM housing. Ensure that the VCM housing is
seated in slots on HB bracket. (See Figure 2)
5. Tighten the four 5/16" flange nuts. (See Figure 2)
4
5
VCM Housing
x 4
Seat VCM in HB
bracket slots
Produktspecifikationer
| Varumärke: | Chief |
| Kategori: | Projektor tillbehör |
| Modell: | HB75P |
Behöver du hjälp?
Om du behöver hjälp med Chief HB75P ställ en fråga nedan och andra användare kommer att svara dig
Projektor tillbehör Chief Manualer
4 Mars 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
Projektor tillbehör Manualer
- Sanyo
- Unicol
- Lindy
- Roadinger
- BenQ
- Speaka
- Peerless
- Hitachi
- Chipolino
- Elite Screens
- Peerless-AV
- Fromm-Starck
- Da-Lite
- Manhattan
- Sanus
Nyaste Projektor tillbehör Manualer
27 Mars 2025
27 Mars 2025
21 Februari 2025
31 Januari 2025
31 Januari 2025
29 Januari 2025
10 Januari 2025
7 Januari 2025
27 December 2024
27 December 2024