Chief SLM2100 Bruksanvisning

Läs gratis den bruksanvisning för Chief SLM2100 (1 sidor) i kategorin Projektor tillbehör. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 5 recensioner. Har du en fråga om Chief SLM2100 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
8850-000143 08/02/07
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
INSTALLATION INSTRUCTIONS
SLB-2100 HANGER RACKETB
for Luxeon D520P, Vivitar DLP-2100S, DLP-2100X,
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
(1) SLB-2100 Bracket (3) M4 -12mm Flat Head Screw
(3) 10 - 24 Thumb Nuts (3) 1/2" x .218 x 1/4" Nylon Spacer
INSTALLATION INSTRUCTIONS
1. Turn projector upside down.
2. Place the three ¼” nylon spacers over the three threaded inserts in the bottom of the
projector.
3. Place the SLB2100 bracket onto the three ¼ nylon spacers on the bottom of the
projector lining up the three mounting holes in the bracket with the three nylon spacers.
4. Using the three M4 x 12mm screws start them into the three threaded inserts and tighten
all fasteners at this time, securing the bracket to the projector. CAUTION: When
attaching the mount be careful not to overtighten screws.
5. See RPA and/or Smart-Lift™ Instructions.

Produktspecifikationer

Varumärke: Chief
Kategori: Projektor tillbehör
Modell: SLM2100

Behöver du hjälp?

Om du behöver hjälp med Chief SLM2100 ställ en fråga nedan och andra användare kommer att svara dig