Corsair Link Bruksanvisning
Läs gratis den bruksanvisning för Corsair Link (15 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 5 recensioner. Har du en fråga om Corsair Link eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/15
Corsair Link v2.4 Manual
Inial Set- up
Placing devices within the chassis
When you rst start up Corsair Link, there will be a list of auto-detected devices on the left column. You can drag and
drop the devices listed from the le-hand side of the screen and place them anywhere on the chassis.
To do this, simply left-click and hold on the device you wish to move, and then drag and drop the icon to the locaon
you wish to place it. It may help you for ease of use later to group devices and their associated funcons in the
approximate locaon of that device within the chassis. For example, place the CPU device and monitoring tools
where the CPU exists within the case.
You do not have to use the default chassis image and can change this to a range of pre-loaded images. To change the
background image of the chassis, double or right click anywhere on the chassis image and then select a new image
from the list that appears. You can also upload your own, with the Upload a Custom Image funcon. “ ”
Changing device properes
Temperature Se o Conguraon ns r
To change the properes of any device or monitoring funcon, simply right click or double click on any device icon.
This will bring up the properes window on the right hand side. Here you can change the properes of the device
using the drop down menus. You can see here we are adjusng the conguraon for Cooling Temp 1. These devices
can also be renamed.
Device Conguration
Because some motherboards report RPM speeds dierently depending on the chipset being used, it may be
necessary to set a speed divider for the pump RPM as needed. If the RPM seems abnormally high or low compared
to what you have, enable the speed divider.
Fan Conguraon
Selecng a fan will enable several opons in the drop down menus on the right hand panel
1. Low Noise - If you require your system to be as quiet as possible, select Quiet mode to run the fan at low
speeds regardless of the temperature. This will result in very low noise levels but higher temperatures.
Produktspecifikationer
| Varumärke: | Corsair |
| Kategori: | Inte kategoriserad |
| Modell: | Link |
Behöver du hjälp?
Om du behöver hjälp med Corsair Link ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Corsair Manualer
27 Mars 2025
26 Mars 2025
8 Februari 2025
30 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
14 December 2024
26 September 2024
Inte kategoriserad Manualer
- Autel
- BOB Gear
- Dell
- Eero
- Blaze
- Graphite
- Coyote
- Outwell
- Innoliving
- Digital Forecast
- Ventura
- HDFury
- DAS Audio
- Empress Effects
- Sauter
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025