Cotech EMT769A Bruksanvisning
Cotech
Inte kategoriserad
EMT769A
Läs gratis den bruksanvisning för Cotech EMT769A (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 7.5 recensioner. Har du en fråga om Cotech EMT769A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
English
UNITED KINGDOM • customer service
tel: 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZe-mail internet postal
Ver. 20180920
Digital Timer
Art.no 36-4867 Model EMT769A-ET2
Please read theentire instruction manual before use and save it for future reference.
Wereserve theright for any errors in text or images and for making any necessary
technical changes to this document. Ifyou should have any questions concerning
technical problems please contact our Customer Services.
Safety
• Make sure that theelectrical socket that theproduct is plugged into is
easily accessible in case it and theconnected product need to be quickly
disconnected from themains electricity.
• Do not connect products of this type to each other.
• Do not cover theproduct.
Product description
• Clock
• 2 on/off programmes
• Built-in backup battery
• Backlit display
• Childproof safety shutters
Buttons and functions
Operation
Note: Thetimer has abackup battery. Youcan programme theon/off switching
times even when thetimer is not plugged into awall socket. Programmed times
will be saved in theevent of apowercut.
Setting theclock
1. Press [ MENU ] until clock mode is entered.
2. Hold in [ OK ] until thehoursflash.
3. Set thehours using [ ] or [ −1 ].
4. Press [ OK ] to change to theminutes.
5. Set theminutes using [ ] or [ −1 ].
6. Press [ MENU ] when thetime has beenset.
Programming theon/offtimes
• There are 2 on/off programmes.
• You can set thetimer to switch on and off twice aday.
• Programme 1 controls 1 on-switching and 1 off-switching operation.
• Programme 2 controls 1 on-switching and 1 off-switching operation.
Setting theon and off times for programme 1
1. Press [ MENU ] until thetime is displayed and “PROG” and “1 ON” flash.
2. Press [ OK ] until thehoursflash.
3. Set thehours using [ ] or [ −1 ].
4. Press [ OK ] to change to theminutes.
5. Set theminutes using [ ] or [ −1 ].
6. Press [ OK ] until theset time is displayed and “1 ON” flashes.
7. Press [ ] or [ -1 ] until thetime is displayed and “PROG” and “1OFF” flash.
8. Press [ OK ] until thehoursflash.
9. Set thehours using [ ] or [ −1 ].
10. Press [ OK ] to change to theminutes.
11. Set theminutes using [ ] or [ −1 ].
12. Press [ MENU ] to return to clockmode.
Setting theon and off times for programme 2
1. Press [ MENU ] until thetime is displayed and “PROG” and
“1 ON” flash.
2. Press [ ] or [ −1 ] until thetime is displayed and “PROG” and “2ON” flash.
3. Press [ OK ] until thehoursflash.
4. Set thehours using [ ] or [ −1 ].
5. Press [ OK ] to change to theminutes.
6. Set theminutes using [ ] or [ −1 ].
7. Press [ OK ] until theset time is displayed and “PROG” and “2 ON” flash.
8. Press [ ] or [ −1 ] until thetime is displayed and “PROG” and “2 OFF” flash.
9. Press [ OK ] until thehoursflash.
10. Set thehours using [ ] or [ −1 ].
11. Press [ OK ] to change to theminutes.
12. Set theminutes using [ ] or [ −1 ].
13. Press [ MENU ] to return to clockmode.
Setting ON, OFF, ON AUTO or OFF AUTOmode
1. Press [ MENU ] to enter clockmode.
2. Press [ ] to change modes in thefollowing sequence:
- “ON” Thetimer is on continuously, regardless of any programmed on/offtimes.
- “ON AUTO” Thetimer is on until theset off times. Thetimer is switched on
again at theset ontimes.
- “OFF” Thetimer is off continuously, regardless of any programmed on/offtimes.
- “OFF AUTO” Thetimer is off until theset on times. Thetimer is switched
off again at theset offtimes.
Care and maintenance
• Always unplug thetimer before cleaning it.
• Clean theproduct using alightly moistened cloth. Onlyuse mild cleaning
agents, never solvents or corrosive chemicals.
Responsible disposal
1. [ MENU ] Switches between time display mode (clock) and programme
settings mode.
2. [ OK ] Changes settings mode (hour, minute, and programme).
3. [ ] Increases thesetting in time settings mode. Pressand hold in to
increase setting quicker.
4. [ −1 ] Decreases thesetting in time settings mode. Pressand hold in to
decrease setting quicker.
5. [ ] Turnsthescreen light on/off.
Note:Only works when thetimer is plugged into awall socket.
6. [ RST ] Press carefully to reset all settings.
7. [ RCL ] Puts theclock forward one hour for Summer Time, etc.
This symbol indicates that this product should not be disposed
of with general householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm to theenvironment
or health hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that thematerial
can be disposed of in aresponsible manner. Whenrecycling
your product, take it to your local collection facility or contact
theplace of purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Rated voltage 230 V, 50 Hz, 16A
Size 135×70×36mm
1 2 3 4
5 6 7
Produktspecifikationer
| Varumärke: | Cotech |
| Kategori: | Inte kategoriserad |
| Modell: | EMT769A |
Behöver du hjälp?
Om du behöver hjälp med Cotech EMT769A ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Cotech Manualer
18 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
15 September 2024
12 September 2024
1 September 2024
Inte kategoriserad Manualer
- Jupiter
- Atmel
- Atlas Sound
- ProfiCook
- Wentronic
- KM-fit
- GAO
- Reber
- LightKeeper Pro
- AquaMAX
- GLP
- Mac Tools
- Grüniq
- Newstar
- WHD
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025