Cres Cor H138NPSCC3MQ Bruksanvisning
Cres Cor
ej kategoriserat
H138NPSCC3MQ
Läs gratis den bruksanvisning för Cres Cor H138NPSCC3MQ (7 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 1.5 recensioner. Har du en fråga om Cres Cor H138NPSCC3MQ eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
5925 Heisley Road • Mentor, OH 44060-1833
Holding Cabinet
FL-2331
Rev. 3 (3/14) Page 1 of 7
Cabinet model number:
Cabinet serial number:
Authorized Service Agency:
Ph: Fax:
Keep this manual for future reference.
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H138NPSCMQ Series Hot Cabinet
and H138NPSCMQ-15A Series Hot Cabinet
5925 Heisley Road • Mentor, OH 44060-1833
Holding Cabinet
FL-2331
Rev. 3 (3/14) Page 2 of 7
ELECTRICAL SPECIFICATIONS:
Model No. Volts Watts Amps Hertz Phase NEMA
H138NPSC
120 2000 16.6 60 1 5-20P
H138NPSC-15A
120 1500 12.5 60 1 5-15P
Note: The above model numbers are basic models. They will be followed by numbers and letters.
INSTALLATION:
1. Remove all paper and packing material from
inside of cabinet.
2. Remove protective paper and vinyl material from
outside surfaces of cabinet.
3. Place the cabinet in a well-ventilated area.
4. Place cabinet on level oor.
5. Plug cord end into proper wall outlet.
Blower inlet guard must be in place before
operating cabinet.
WARNING
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H138NPSC Series Hot Cabinet
WARNING
Air is VERY HOT
when door is opened.
FIRST TIME START-UP:
1. Push the POWER switch to “ON”, and run the
unit for one hour.
NOTE: DO PUT FOOD INTO CABINET!NOT
This step is to burn off manufacturing oils and excess
adhesive.
2. Let the cabinet cool and wipe inside clean with
detergent and hot water before rst use.
HOW TO HOLD:
1. Push POWER switch to “ON.” Yellow POWER
LIGHT will come on.
2. Push the “SET” button on the TEMPERATURE
CONTROL. The TEMPERATURE DISPLAY will
show “SP1” (set point 1).
3. Press “SET” again and the current set point temperature
will be displayed.
4. Press the ADJUST buttons to adjust to the
desired temperature.
5. Press “SET” to save the temperature setting.
6. Preheat cabinet for 45 minutes.
7. Put product into cabinet.
NOTE: Proper food holding temperature is
140°F/60°C or higher.
ADJUST
°F
SET
POWER
LIGHT
POWER
SWITCH
ADJUST
BUTTONS
TEMPERATURE
DISPLAY
“SET” BUTTON
TEMPERATURE
CONTROL
5925 Heisley Road • Mentor, OH 44060-1833
Holding Cabinet
FL-2331
Rev. 3 (3/14) Page 3 of 7
WARNING
BEFORE cleaning the cabinet:
1. Unplug the cabinet from the wall.
2. Allow cabinet to cool.
1. Do use abrasives (steel wool) or harsh NOT
chemicals (chlorine, bromine, iodine or ammonia).
2. Do use a water sprayer (pressure sprayer) to NOT
clean the cabinet.
Cleaning hints:
1. Wipe up spills as soon as possible.
2. Clean cabinet daily to avoid heavy dirt build-up.
3. Make a test spot with cleaner:
a) Follow manufacturer’s directions on cleaner.
b) Do not mix cleaners.
c) Avoid drips and splashes.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE
PERSONNEL ONLY
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
WARNING
HOW TO CLEAN THE UNIT:
Soil Cleaner Method
CABINET
Inside and
Outside
(Stainless Steel)
DAILY CLEANING
Mild detergent and hot
water.
1. Sponge on with cloth.
2. Rinse with water.
3. Wipe dry.
STUBBORN SPOTS AND
STAINS
Mild abrasive made for
stainless steel.
1. Apply with damp sponge or cloth.
2. Rub lightly.
3. Rinse with water and wipe dry.
BURNT-ON FOODS OR
GREASE
Chemical oven cleaner for
stainless steel.
Follow oven cleaner manufacturer’s
directions.
HARD WATER SPOTS
and SCALE
Vinegar
1. Swab or wipe with cloth.
2. Rinse and dry.
*Mild detergents include soaps and non-abrasive cleaners.
Note: Gaskets are removable for cleaning.
MAINTENANCE INSTRUCTIONS
Produktspecifikationer
| Varumärke: | Cres Cor |
| Kategori: | ej kategoriserat |
| Modell: | H138NPSCC3MQ |
Behöver du hjälp?
Om du behöver hjälp med Cres Cor H138NPSCC3MQ ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Cres Cor Manualer
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
ej kategoriserat Manualer
- MGL Avionics
- Entes
- Lavor
- ETC
- Prixton
- Koss
- Teris
- Soundcraft
- Steelseries
- Roblin
- Aqua Joe
- Mach Power
- Membantu
- Bryton
- Flex
Nyaste ej kategoriserat Manualer
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025