Crestron C2NI-AMP-4X100 Bruksanvisning

Crestron Växla C2NI-AMP-4X100

Läs gratis den bruksanvisning för Crestron C2NI-AMP-4X100 (3 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 8.5 recensioner. Har du en fråga om Crestron C2NI-AMP-4X100 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

quickstart guide

C2N(I)-AMP-4X100

www.crestron.com

Specifications subject to

change without notice.

C2N(I)-AMP-4X100

For Regulatory Compliance information, refer to the latest version

of Doc. 7289.

QUICKSTART DOC. 7288B (2032394, Sheet 1 of 2) 04.13

4 Room Audio System

Make the necessary connections as called out in the diagram below. Connect power last.

Hardware Hookup

NOTE: SPEAKER OUTPUTS For triple the power (into 8 speakers only), Ω 1

and 2 or 3 and 4 can be bridged. For example, the left SPEAKER OUTPUTS

speaker’s + and - terminals are connected to the two + terminals of output #1

and the right speaker’s + and - terminals are connected to the two + terminals

of output #2. Refer to the diagram to the right.

To adjust volume when bridged, select 1 for 1 ROOM SPEAKER OUTPUTS

and 2 or select 2 for 3 and 4.ROOM SPEAKER OUTPUTS

RM 1

RM 3

RM 2

RM 4

BRIDGE

8 OHMS ONLY +-

L+-+-R

To Cresnet Devices

NET

From AC Power Line

PWR

Tie to Ground

From Unbalanced Stereo Line Level Audio

Outputs from Source Devices

ANALOG SOURCES (IN)

To Additional Amplifiers

ANALOG SOURCES (OUT)

NOTE: NET The 24 volt lines on the ports of the amplifier are

limited to 300 mA.

To Loudspeakers

SPEAKER OUTPUTS

NON-BRIDGE

L+-+-R

+ - + -

LEFT RIGHT

NOTE: The C2NI-AMP-4X100 (International

version) requires a power cord that is

harmonized to the country’s national and local

electrical codes. Each inner wire in the cord

should be at least 18 AWG (0.75 mm

2) and rated

for at least 300 V. The temperature rating of the

cord should be at least 60º C. The cord length

should be 1.5 - 2 meters.

To Cresnet® Devices

LOOP THRU

2Attach the Labels

Use the included labels and inserts to prepare the C2N(I)-AMP-4X100:

1. Locate the and label inserts included with the unit ( insert has space for six labels, insert has room for four labels).SOURCE ROOM SOURCE ROOM

2. Apply the peel-and-stick labels in the appropriate positions on the inserts, being careful to match label positions to what is configured in the programming software. For neatest appearance, when applying a label,

cover the white guidelines on the insert. First and last labels cover one line each; labels in between cover lines on their left and right sides.

Produktspecifikationer

Varumärke:	Crestron
Kategori:	Växla
Modell:	C2NI-AMP-4X100
Färg på produkten:	Zwart
Husmaterial:	Aluminium
Internationell säkerhetskod (IP):	IP65
LED-indikatorer:	Stroom
Skärm diagonal:	10.4 "
Upplösning:	1024 x 768 Pixels
Pekskärm:	Ja
Skärmform:	Flat
Typiskt kontrastförhållande:	500:1
Touch-teknik:	Multi-touch
Ljusstyrka:	1000 cd/m²
Pekskärmstyp:	Multi-gebruiker
Snabbstartsguide:	Ja
Inkluderar AC-adapter:	Ja
LED-bakgrundsbelysning:	Ja
VGA (D-Sub) port(ar):	1
Antal HDMI-portar:	1
PC-ljud ingång:	Ja
Kompositvideoingång:	1
Strömförbrukning (i standby):	1 W
Display, antal färger:	262144 kleuren
Inbyggd mikrofon:	Nee
HDMI:	Ja
Respons tid:	12.5 ms
VESA montering:	Ja
Bildförhållande:	4:3
Effektiv bilddiameter:	211.2 x 158.4 mm
Inbyggd kamera:	Nee
Djup (utan bas):	276.2 mm
Höjd (utan bas):	41.5 mm
Bredd (utan bas):	209.4 mm
Vikt (utan bas):	1800 g
Skärmdiameter i centimeter:	26.42 cm
AMD FreeSync:	Nee
NVIDIA G-SYNC:	Nee
Typ av bakgrundsbelysning:	LED
Typ av mat:	AC/DC
Antal uppströmsportar:	1
Upphängningssystem för väggen:	Ja
Pekskärmsteknik:	Capacitief
Inkluderar en penna:	Ja
AC-ingångsspänning:	100 - 240 V
Strömförbrukning (typiskt):	18 W
Drifttemperatur (TT):	-25 - 75 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent