Crestron DIN-AO8 Bruksanvisning

Crestron Inte kategoriserad DIN-AO8

Läs gratis den bruksanvisning för Crestron DIN-AO8 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 8 recensioner. Har du en fråga om Crestron DIN-AO8 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

DIN-AO8

DIN Rail Analog Output Module

Installation & Operation Guide

1. Place the top of the DIN-AO8’s rail mount over the top of the DIN rail.

2. Tilt the bottom of the DIN-AO8 toward the DIN rail until it snaps into place.

NOTE: When mounting DIN rail products, it may be necessary to use a at-head

screwdriver to pull the DIN rail release tab while snapping the device onto the DIN rail.

NOTE: Certain third-party DIN cabinets provide space for an informational label

between each DIN rail row. Crestron’s Engraver software (version 4.0 or later) can

generate appropriate labels for all Crestron DIN rail products.

Description

The Crestron® DIN-AO8 is a DIN rail-mounted automation control module that provides

eight analog output ports for interfacing with third-party lighting and heating and cooling

systems.

Installation

WARNING: To avoid re, shock, or death, turn off the power at the circuit breaker or

fuse and test that the power is off before wiring!

NOTES: Observe the following points:

• This product must be installed and used in accordance with appropriate electrical

codes and regulations.

• This product must be installed by a qualied electrician.

Additional Resources

Visit the product page on the Crestron website (www.crestron.com)

for additional information and the latest rmware updates. Use a QR

reader application on your mobile device to scan the QR image.

Hardware Hookup

Make the necessary connections. Apply power after all connections have been made.

WARNING: Prior to connecting the device, turn off power at the circuit breaker. Failure

to do so may result in serious personal injury or damage to the device. Restore power

after all connections have been made.

CAUTION: Connecting this device to the wrong type of load or short-circuiting the load

can cause severe product damage. Each load should be tested to identify a short-circuit

condition prior to wiring the load to the module.

NOTE: Use copper wire only.

NOTE: Each switch leg of the DIN-AO8 may be fed from a separate circuit breaker.

When making OUTPUTS, NET, and OVERRIDE connections, strip the ends of the wires

approximately 7/16 in (11 mm). Use care to avoid nicking the conductors. Tighten the

connector to 5 in-lb (0.5 to 0.6 N-m). The wire gauge should be 14 to 26 AWG.

When making power connections to the DIN-AO8, use a Crestron power supply.

Hardware Connections for the DIN-AO8

OUTPUTS:

To Devices with

Analog Inputs

NET:

To Control System and

Other Cresnet Devices

OVERRIDE:

From Device Providing

Override Signal and to Other

Devices Receiving Override

Signal

DIN-AO8

DIN Rail (Not

Supplied)

DIN Rail

Release

Top

NOTE: To remove the DIN-AO8 from the DIN rail, use a small, at object (i.e., a

at-head screwdriver) to pull the DIN rail release and tilt the bottom of the DIN-AO8

away from the DIN rail.

Produktspecifikationer

Varumärke:	Crestron
Kategori:	Inte kategoriserad
Modell:	DIN-AO8
Färg på produkten:	Zwart
Vikt:	287 g
Bredd:	81.2 mm
Djup:	30.4 mm
Höjd:	170 mm
Batterikapacitet:	- mAh
Blåtand:	Ja
Beeldscherm:	LCD
Skärm diagonal:	4.7 "
Upplösning:	720 x 1280 Pixels
Pekskärm:	Ja
Processorfrekvens:	1.3 GHz
Wi-Fi-standarder:	802.11a, 802.11b, 802.11g
Bluetooth-version:	4.1
GPS:	Ja
Bakre kameraupplösning (numerisk):	8 MP
Autofokus:	Ja
Inkluderar operativsystem:	Android
Typ av anslutningskontakt:	3,5 mm
Antal USB 2.0-portar:	1
Hörlursutgångar:	1
Luidsprekers:	Ja
Inbyggd blixt:	Ja
Inbyggd mikrofon:	Ja
Internminne:	0.003 GB
Bluetooth Low Energy (BLE):	Ja
Internminnestyp:	RAM
Inbyggd kamera:	Ja
Typ processor:	Ja
Förvaringstemperatur:	-20 - 50 °C
Datanätverk:	GSM, LTE, UMTS
Flashminne:	16 GB
Streckkoder som stöds (1D):	Code 11, Code 128, Code 32, Code 39, Code 93, Interleaved 2 of 5
Telefonfunktion:	Ja
RFID-läsare:	Ja
Wifi:	Ja
Drifttemperatur (TT):	-30 - 60 °C
Relativ luftfuktighet i drift (VV):	5 - 95 procent
Batteriteknik:	Lithium-Ion (Li-Ion)
2D (matris och staplade) streckkoder stöds:	Aztec Code, Composite Codes, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code, TLC-39