Crestron ST-RMK Bruksanvisning
Crestron
Inte kategoriserad
ST-RMK
Läs gratis den bruksanvisning för Crestron ST-RMK (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8.5 recensioner. Har du en fråga om Crestron ST-RMK eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Rack Mount Kit: ST-RMK
Physical Description
The ST-RMK is a rack mount kit that is capable of holding either one or two CEN Ethernet Modules,
SmarTouch STS Expansion Modules, ST-CP Control Processors, or any combination of units in a
single rack space. The front extrusion and bracket are provided to occupy the open bay of the ST-RMK
so that when only one module (or ST-CP) is installed, no gaps are visible in the rack. The front
extrusion and bracket may be installed in either the left or right bay of the ST-RMK. When the
ST-RMK accommodates two modules, the extrusion and bracket are not used.
Items 1 through 6 listed below are the supplied components of the ST-RMK. The tools required for
installation of the ST-RMK are a #1 Phillips 1/4-inch hex bit, a 1/4-inch hex socket, and an inch-pound
torque driver. Follow the installation procedures in the next section.
Supplied Components
ITEM DESCRIPTION PART NUMBER QUANTITY
1 Assembly, chassis & front extrusion AY17489-1 1
2 Assembly, front extrusion & label AY17490-1 1*
3 Bracket MTBK02315-1 1*
4 Screw, 4-40 x 1/4"L, steel, pan, phillips, black SR04-40-0R2500-8 8*
5 Nut, 4-40, hex, steel, zinc MTPL02390-1 4
6 Washer, lock, steel, internal, #4, zinc WA04L0-1 4
* Depending upon number of modules installed, not all items may be required.
Rack Mount Instructions
Front Extrusion and Bracket Installation
If two modules (or ST-CPs) are to be installed onto the ST-RMK, skip this procedure and proceed to
the next section. If only one module is to be installed, the front extrusion and bracket should be
installed into either the left or right bay of the chassis. To install the extrusion and bracket, refer to the
diagrams and steps below (installation into the right bay is shown, left bay installation is identical).
Install Front Extrusion & Bracket
2
3
65 4
1
3
DIAGRAM FOR STEPS 1 & 2 DIAGRAM FOR STEPS 3 - 6
X 4 X 2
Installation Guide - DOC. 5664A Rack Mount Kit: ST-RMK •
•
•
•• 1
Produktspecifikationer
| Varumärke: | Crestron |
| Kategori: | Inte kategoriserad |
| Modell: | ST-RMK |
Behöver du hjälp?
Om du behöver hjälp med Crestron ST-RMK ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Crestron Manualer
2 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
Inte kategoriserad Manualer
- Xaoc
- Crunch
- Creative
- TensCare
- Enermax
- Digital Juice
- Brainstorm
- Digigram
- Sunpentown
- Gamesir
- Crouzet
- Twisted Electrons
- Yamaha
- Foster
- OXI Instruments
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025