CRUX HBRHD-61A Bruksanvisning


Läs gratis den bruksanvisning för CRUX HBRHD-61A (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 10 recensioner. Har du en fråga om CRUX HBRHD-61A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
RADIO REPL ACEMENT
HANDLE BAR CONTROL
RETENTION
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.092519
HBRHD-61A
Radio Replacement Interface with Handle Bar
Control Retention for Harley Davidson 1998-2013
1 of 2
PRODUCT FEATURES:
NOTE:
PARTS INCLUDED:
- Retains handle bar mounted radio controls (if equipped).
- Plug and Play. No wire cung to the OEM harness required.
- Siri Control and Android Control Voice Control funcon (if aermarket radio supports these features).
For 2 speaker systems only.
HBRHD-61A MODULE HBRHD-61A Harness SWC Cable
INSTALLATION DIAGRAM:
AFTERMARKET
RADIO
+12V Constant Yellow
+12V ACC Red
Ground Black
Right Front (+) Gray
Right Front (-) Gray/Black
Le� Front (+) White
Le� Front (-) White/Black
TO FACTORY
HARNESS
14-Pin Black
Connector
23-Pin
Connector
1 2 3
ON
AFTERMARKET
RADIO SELECTOR
(See Chart)
HD-10
Cap or insulate if
not being used
Kenwood/JVC (BLUE / YELLOW) Insulate with tape
if not being used
3.5MM SWC CABLE
Plug in the 3.5MM SWC cable to the 4-pin port
on the module. See “DIP SWITCH SETTINGS” section.


Produktspecifikationer

Varumärke: CRUX
Kategori: Inte kategoriserad
Modell: HBRHD-61A

Behöver du hjälp?

Om du behöver hjälp med CRUX HBRHD-61A ställ en fråga nedan och andra användare kommer att svara dig