CRUX RVCTY-71D Bruksanvisning

CRUX Backkamera RVCTY-71D

Läs gratis den bruksanvisning för CRUX RVCTY-71D (3 sidor) i kategorin Backkamera. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 5 recensioner. Har du en fråga om CRUX RVCTY-71D eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
- Plug and play connector for easy installation.
- Parking guide lines with On-Off feature.
- Mirror image capability for top mount of lip mount installation.
- Adjustable UP-DOWN camera lens angle.
TOYOTA
2012 – 2013 Tundra
INSTALLING THE CAMERA AND CABLE
1. Remove the tailgate cover.
2. On the right side of the tailgate handle, drill a hole using the hole saw provided.
3. Route the camera cable through the hole and secure the camera to the handle.
4. Connect the 4-Pin plug to the provided factory plug underneath the truck (near the spare tire) as the
cable is pre-ran for the camera from the factory.
5. Put the gear in reverse to test the camera.
6. Re-install the tailgate cover.
Rev.031417
1
4-Pin Connector near
the spare tire

Produktspecifikationer

Varumärke: CRUX
Kategori: Backkamera
Modell: RVCTY-71D

Behöver du hjälp?

Om du behöver hjälp med CRUX RVCTY-71D ställ en fråga nedan och andra användare kommer att svara dig