CRUX RVCVW-73B Bruksanvisning

CRUX Backkamera RVCVW-73B

Läs gratis den bruksanvisning för CRUX RVCVW-73B (6 sidor) i kategorin Backkamera. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 6.5 recensioner. Har du en fråga om CRUX RVCVW-73B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
- Codes the factory radio to turn on the reverse camera function.
- OEM type license plate light camera with incandescent bulb included.
- Includes camera power down circuit to extend the life of the camera.
- MFD3 or RNS-315 Navigation Radios.
In the event this unit is to be returned for any reason, the customer must “decode” the radio
before doing so to receive a replacement or refund. See instructions on page 2 on how to
decode the radio.
RVCVW-73B
MODULE
RVCVW-73B
HARNESS
OBD II ENCODER
CVW-07B
CAMERA
POWER DOWN
CIRCUIT
The parking lines are there to assist you while reversing. To activate the parking lines simply
cut/disconnect the WHITE loop wire located near the 4-pin camera connector.
What the Lines mean:
Green Line: CLEAR
Yellow Line: GETTING CLOSE
Red Line: WARNING - VERY CLOSE
rev.121819
1 / 2
GREEN
YELLOW
RED


Produktspecifikationer

Varumärke: CRUX
Kategori: Backkamera
Modell: RVCVW-73B

Behöver du hjälp?

Om du behöver hjälp med CRUX RVCVW-73B ställ en fråga nedan och andra användare kommer att svara dig