CYP AU-A300-HBT Bruksanvisning

CYP mottagare AU-A300-HBT

Läs gratis den bruksanvisning för CYP AU-A300-HBT (21 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 9.5 recensioner. Har du en fråga om CYP AU-A300-HBT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/21
AU-A300-HBT
HDBaseT™ 2-Channel Digital AV Receiver (Repeatable)
OPERATION MANUAL
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of fi re,
electrical shock and injury to persons.
To prevent fi re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
Do not attach the power supply cabling to building surfaces.
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
suffi cient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 23/01/14 Preliminary Release
CONTENTS
1. Introduction ............................................ 1
2. Applications ........................................... 1
3. Package Contents ................................ 1
4. System Requirements ............................ 1
5. Features .................................................. 2
6. Operation Controls and Functions ....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel .........................................4
6.3 RS-232 Pin Assignment .....................5
6.4 IR Cable Pin Assignment..................6
7. Remote Control ...................................... 7
7.1 OLED Menu .......................................8
7.2 Telnet & RS-232 Command .............9
7.3 Telnet Control .................................11
7.4 WebGUI Control .............................13
8. Connection Diagram .......................... 14
9. Specifi cations ......................................15

Produktspecifikationer

Varumärke: CYP
Kategori: mottagare
Modell: AU-A300-HBT
Vikt: 1060 g
Bredd: 215 mm
Djup: 172.5 mm
Höjd: 46 mm
Ljudformat som stöds: LPCM
Certifiering: CE/FCC/UL
RS-232 port: 1
Grafikupplösningar som stöds: 3840 x 2160,4096 x 2160
Ljudutgångskanaler: - kanaler
Samplingshastighet: 96 kHz
Antal kanaler: 2 kanaler
Antal HDMI-utgångar: 1
Produktens färg: Svart
Inbyggd kortläsare: Nej
Antal LAN (RJ-45) anslutningar: 1
Strömförbrukning (vanlig): 59.4 W
Temperatur vid drift: 0 - 40 ° C
Temperaturintervall (förvaring): -20 - 60 ° C
Intervall för relativ operativ luftfuktighet: 20 - 90 %
Antal produkter som medföljer: 1 styck
Utgångsspänning: 24 V
Anslutningsteknologi: Kabel
Nätverksansluten (Ethernet): Ja
Effekt per kanal (20-20KHz @ 8 ohm): - W
Antal ljudutgångar vänster/höger: 1
Optisk enhet ingår: Nej
Apple-kompatibel dockningsmöjlighet: Stöds inte
Displaytyp: LED
Ljudförstärkare: Ja
Ljudingång (vänster och höger): 1
Fjärrstyrd IR-utgång: 1
Signal/brusförhållande (SNR): 70 dB
Linje in: Ja
Digital audio optisk, ingående: 1
Digital koaxialingång för ljud: 1
HDMI-in: 1
Fjärrstyrd (IR) ingång: 1
Dynamisk effekt per kanal (8 ohm): 15 W
Dynamisk effekt per kanal (4 Ohm): 30 W

Behöver du hjälp?

Om du behöver hjälp med CYP AU-A300-HBT ställ en fråga nedan och andra användare kommer att svara dig