Denver CCT-1300 Bruksanvisning
Läs gratis den bruksanvisning för Denver CCT-1300 (6 sidor) i kategorin Dashcam. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2.5 recensioner. Har du en fråga om Denver CCT-1300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
Portable HD Car DVR
User Manual
Thank you for choosing our HD720P Car DVR. Please read this user manual carefully before opera ng the device.
Product Image and Feature Iden ca on.fi
-ENG 01-
For the power capacity in the ba ery, refer to the following icons:
Full Middle Low
1. Connect device to car adaptor through Mini-USB port, device will power on automa
cally & enter standby mode and start
charging with green indicator light ON.
Once device has been fully charged, red indicator light goes out.
2. Connect device to PC via USB cable, device will power on automa
cally. Choose between and ‘Mass Storage (MSDC)’mode
or ‘PC-Cam’, by pressing ‘UP’/’DOWN’and con rm by pushing ‘OK’bufi
on and start charging.
Once device has been fully charged, red indicator light goes out.
Installa
on and Removal of micro SD card
1
. In the direc
on as indicated, insert the micro SD card into the slot un l it is held rmly.fi
2. To take the micro SD card out, slightly press the micro SD card to eject it.
[Note]:
1. Observe the direc
on to insert the micro SD card; if the direc on is wrong, the device and/or the micro SD card may be
damaged.
2. When the micro SD card is inserted into the device, the machine will set the micro SD card as preset storage.
3. If the micro SD card is incompa
ble with the device, please insert the card again or replace it for retry.
4. PLEASE USE 8GB
-32GB/CLASS 10 (C10) MICRO SD CARDS ONLY.
5. Please insert the micro SD card ONLY when device is OFF.
01. Up (Zoom in)
02. Menu
03. Down (Zoom out)
04. Mini USB
05. Lens
06. Speaker
07. REC/OK
08. Mode (video lock)
09. ON/OFF
10. LCD Screen
11. Micro SD card slot
12. Holder socket
13. Reset
14. Microphone
-ENG 02-
Opera on Instruc ons
Turn ON/OFF Device
1. Press the power key for 1 second to switch ON and hold for 3 seconds to switch OFF device manually.
2. Connect the device with car charger in the car. When car engine starts up, device will be switched ON automa
cally. When
car engine shuts o or car charger been disconnected, device switches OFF with 10 seconds delay (as per seff
ng).
How to Enter System Setup
In Video or Photo mode, press the Menu key-UP/DOWN key-REC/OK key to enter the System Setup:
- Date/Time: You may set date/
me.
-
Auto Power o : o /1 minute/3 minutes. To power o DVR automaff ff ff
cally if DVR is not recording.
- Beep sound: on/o . To turn on/o the sound of pressing buff ff
ons.
- Language: You may set the desired OSD language menu.
- Backlight (Power save): O /3 min. /5 min. /10 min. To shut o the LCD screen automaff ff
cally during video recording.
- TV Mode: PAL/NTSC
- Power Frequency: 50Hz/60Hz
- Format: Format the memory card.
- Default se
ngs: Cancel/OK
- Version: Firmware version number.
Take Video and Set Video Menu
1. Take video
A
er powered ON, device en
ters Video Mode as default, with icon
displaying at the upper-le corner of screen. Press
the ‘REC/OK’key to start video recording a
er proper Micro SD card been inserted. During recording, the red icon
flashes.
[Note]
- When the device is mounted on the windshield with car charger connected, it will power ON and start recording
automa
cally once car engine starts up.
- During charging with car charger connected, it supports simultaneous recording.
- During recording, press ‘MODE’bu
on to lock and protect the current video from recycling (it’s called ‘SOS’func on).
2. Set Video Menu
Press the Menu key to enter the setup of video op
ons
- Resolu
on: Default
- Loop
recording: O /1 min. /2 min. /3 min. To record, store and recycle the video le by 1/2/3 minutes per secff fi
on.
- Exposure: -2.0 -5/3 -4/3 -1.0 -2/3 -1/3 +0.0 +1/3 +2/3 +1.0 +4/3 +5/3 +2.0
- Mo
on detec on: On/O . When car is parked and mo on detec on turned On, DVR will detect moving objects in front of carff
and trigger recording automa
cally, or stay at standby state if there’s no object moving.
- Record Audio: On/O . Choose to record the video with audio, or record video without any sound.ff
- Date Stamp: On/O .ff
- G-Sensor
: O /1G/2G. Once G-sensor turned ON to 1G or 2G and triggered, there’s an icon of ‘lock’appearing on LCD screenff
and current video le will be locked as important le. Such locked les won’t be recycled by loop recording funcfi fi fi
on.
Take Photo and Set Photo Menu
1. Take Photos
Press the power key to enter the video mode as default; press the Mode key to enter the Photo mode with icon
displaying on the upper-le corner of the screen. Then, hold the device rmly, then press REC/OK key to take photos. Photosfi
will be stored into memory card automa
cally.
2. Set Photo Menu
During photo mode, press MENU and REC/OK key to enter photo menu se
ngs.
- Capture Mode: Single/2S Timer /5S Timer /10S Timer
-ENG 03-
Produktspecifikationer
| Varumärke: | Denver |
| Kategori: | Dashcam |
| Modell: | CCT-1300 |
Behöver du hjälp?
Om du behöver hjälp med Denver CCT-1300 ställ en fråga nedan och andra användare kommer att svara dig
Dashcam Denver Manualer
15 Juli 2025
15 Juli 2025
6 September 2024
24 Augusti 2024
22 Augusti 2024
16 Augusti 2024
16 Augusti 2024
8 Augusti 2024
6 Augusti 2024
3 Augusti 2024
Dashcam Manualer
- Osram
- Kapture
- Swann
- Roadeyes
- DOD
- Blow
- Carmera
- VIOFO
- TrueCam
- Salora
- Ring
- Scosche
- Dashmate
- Valueline
- Nordval
Nyaste Dashcam Manualer
16 Juli 2025
16 Juli 2025
16 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025