Denver DAB-10 Bruksanvisning
Läs gratis den bruksanvisning för Denver DAB-10 (29 sidor) i kategorin bilradio. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2.5 recensioner. Har du en fråga om Denver DAB-10 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/29
In-car DAB+ adaptor
DAB-10
Instruction Manual
English
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY
COVER. NO USER-SERVICEABLE PARTS INSIDE, REFER ANY SERVICING TO
QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
• Read and keep these instructions available for future reference.
• For indoor use only
• To reduce the risk of fire or electrical shock, do not expose this unit to
rain or moisture.
• The apparatus should not be exposed to dripping or splashing.
• No objects filled with liquids, such as vases, shall be placed on the
apparatus.
• Take care that foreign objects do not enter, or liquids are not spilled,
into the case
through any openings. If this should happen, refer to qualified service
personnel before attempting to use.
• Do not install near any heat source, such as radiators, or other
equipment that produces heat.
To clean the DAB-10 radio, wipe the case with a slightly moist, lint-free cloth.
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
Do not spray an aerosol at or near the radio. Always use original packaging if
it is necessary to transport the unit at any time. If this unit is used in a dusty
environment, it may be necessary to have the unit serviced at your local
dealer periodically. It is not advisable to allow large deposits of dust to
accumulate within the unit as it may prevent adequate cooling. Similarly dust
deposits, which become damp, can sometimes lead to electrical problems,
which may cause severe damage to the delicate electronics within this unit.
Location of Controls
1. LCD Display
2. Standby/ Select
3. Menu/ Info
4. FM Transmission
5. Backward
6. Forward
7. Antenna jack
8. Audio out jack
9. Audio in jack
10. DC jack
Installation
1. Assemble the cradle
Assemble the cradle by hooking up the unit into the holder.
2. Secure the DAB-10 unit into the cradle
3. Connect the supplied USB cable to the DC jack located on the side
panel of DAB-10 and the USB jacks on the cigarette-lighter power plug.
Please refer to the section on LOCATIONS OF CONTROL for the side
view of the adaptor.
ENG 1 ENG 2
Produktspecifikationer
| Varumärke: | Denver |
| Kategori: | bilradio |
| Modell: | DAB-10 |
Behöver du hjälp?
Om du behöver hjälp med Denver DAB-10 ställ en fråga nedan och andra användare kommer att svara dig
bilradio Denver Manualer
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
2 Oktober 2024
14 September 2024
14 September 2024
bilradio Manualer
Nyaste bilradio Manualer
14 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
19 Juni 2025
14 Juni 2025
14 Juni 2025