Dito Sama 600108 Bruksanvisning
Dito Sama
skärmaskin
600108
Läs gratis den bruksanvisning för Dito Sama 600108 (7 sidor) i kategorin skärmaskin. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 5.5 recensioner. Har du en fråga om Dito Sama 600108 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
2.2 LOCATION AND LAYOUT
1
Contents
Introduction 1
Installation 1
Use, safety 2
Cleaning, hygiene and storage 4
Fault nding 5
Maintenance 6
Conformity with regulations 7
GB
12/2023
This document is to be used in conjunction with the original manufacturer’s manual.
The symbols correspond with the numbered drawings of the original manual.
TRS GB 09 06
2.2
Introduction
1.1 DESCRIPTION
The multi-purpose vegetable cutting machine can slice, shred,
grate, chip and dice various foodstus (for the preparation of raw
and cooked vegetables, fruits and cheeses).
With its range of high output cutters, the machine is the profes-
sional vegetable cutter for restaurants, large kitchens and small
companies.
A Body
B Stop button (red)
C Start button (black)
D Feed stick
E Feed arm
F Large feed hopper
G Cover
H Discharge chute
I Cover lock
J Feet
K Plastic of stainless steel housing, depending
on models
1.1
Installation
2.1 DIMENSIONS - WEIGHT (for information only)
• Dimensions of packaging in mm :
L : 630 W : 270 h : 530
• Dimensions of the machine :
Gross weight when packaged : 20kg
Net weight when equipped : 18kg (excluding cutters)
2.1
• For larger bowls, position the TRS on the edge of the table or
use the mobile work base.
- Remove the feed pusher from the chute (anti-clockwise
Introduction
The User Manual contains useful information for the user on how
to work correctly and in complete safety, and is designed to make
it easier to use the machine (called «machine» or «appliance»
below).
What follows is in no case intended to be a long list of warnings and
constraints, but rather a series of instructions meant to improve the
service provided by the machine in every respect, and particularly
to avoid a series of injuries or damage to equipment that might
result from inappropriate procedures for use and management.
It is essential that all the people responsible for transporting,
installing, commissioning, using, maintaining, repairing or dis-
mantling the machine should consult this manual and read it
carefully before proceeding with the various operations, in order
to avoid any incorrect or inappropriate handling that might be
result in damage to the machine or put people’s safety at risk.
It is just as important that the Manual should always be available
to the operator and it should be kept carefully where the machine
is used ready for easy and immediate consultation in case of any
doubt, or in any case, whenever the need arises.
If after reading the Manual, there are still any doubts concerning
how to use the machine, please do not hesitate to contact the
Manufacturer or approved After Sales Service provider, who is
constantly available to ensure quick and careful service for im-
proved machine operation and optimum eciency.
Note that the safety, hygiene and environmental protection stan-
dards currently applicable in the country where the machine is
installed must always be applied during all phases of machine
operation. Consequently it is the user’s responsibility to ensure
that the machine is operated and used solely under the optimum
safety conditions laid down for people, animals and property.
The machine may be :
• Fitted on a table of between 700 and 900 mm maximum in height
and take a standard 150 mm high receiving bowl.
• Fitted on a mobile work base (available in option).
! Always place the machine on a strong, at, stable
support
The reference language for these instructions is French.
Produktspecifikationer
| Varumärke: | Dito Sama |
| Kategori: | skärmaskin |
| Modell: | 600108 |
Behöver du hjälp?
Om du behöver hjälp med Dito Sama 600108 ställ en fråga nedan och andra användare kommer att svara dig
skärmaskin Dito Sama Manualer
19 Augusti 2025
19 Augusti 2025
18 Augusti 2025
18 Augusti 2025
18 Augusti 2025
18 Augusti 2025
18 Augusti 2025
18 Augusti 2025
18 Augusti 2025
18 Augusti 2025
skärmaskin Manualer
- Magimix
- Taurus
- Boska
- Nemco
- Orbegozo
- Gourmia
- Gude
- De Buyer
- Ritter
- Primo
- Nevir
- Catler
- Alpha Tools
- Makita
- Graef
Nyaste skärmaskin Manualer
15 Oktober 2025
13 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
9 Oktober 2025
9 Oktober 2025