Dormakaba RCI 8375 Bruksanvisning

Dormakaba Inte kategoriserad RCI 8375

Läs gratis den bruksanvisning för Dormakaba RCI 8375 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 6.5 recensioner. Har du en fråga om Dormakaba RCI 8375 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

INSTALLATION

RCI 8375

SURFACE MICROMAG

ELECTROMAGNETIC LOCKS

www.dormakaba.us • Phone: 1.800.265.6630 • Fax: 1.800.482.9795 • E-mail: sales_RCI@dormakaba.com

IS8375

PCN18041

R03-20GR-1

Pre-Installation Instructions

1. This product must be installed according to all applicable building

and life safety codes.

2. Due to the variety of mounting configurations available with this

product, a survey and assessment of the physical area in which

the product will be installed must be performed.

3. The door frame must be inspected and deemed structurally sound

prior to installation of the electromagnetic lock. The structural

integrity of the mounting surfaces must be strong enough to meet

or exceed the holding force of the product.

4. The product must be protected from potential damage due to

intruders or tampering.

5. The product should be installed in a location that will not hinder

or create a potential safety hazard to authorized personnel

accessing the protected area.

6. Because electromagnetic locks are used in a variety of applications

and different door frame configurations, an experienced installer

with knowledge of this product must make a determination of the

optimal mounting method for this specific application.

7. The components, hardware, installation instructions and mounting

template included with this product are intended for use on

outswinging doors.

8. Do not install this product on the exterior of buildings.

9. Do not use as a doorstop. This will void warranty.

10. Separate accessories not included with this product must be used

in the following applications:

• Inswinging doors

• Narrow head jamb situations or center-hung doors

• Wherever there is insufficient space on the door

frame header to mount the lock

• Glass or Herculite doors that do not have a door frame

• Hollow metal or wood frames where the door stop is

not thick enough to allow the product to be installed

• Wherever an obstruction in the door prevents

installation of the armature plate at a proper height

• Doors that do not permit the armature plate to be

mounted low enough to meet the magnet surface

Refer to the page 4 Product Accessories Guide for further

information. Accessories may impact holding force.

11. Installation of this product should be done by an experienced

installer with knowledge of this product.

NOTE: It is highly recommended that thread locking compound be

applied to all screws during installation to reduce chance of screws

loosening over extended time.

PLEASE DELIVER ALL INSTALLATION INSTRUCTIONS TO

THE END-USER UPON COMPLETION OF THE INSTALLATION.

Fig. 1.

8375 Mounting

Plate Removal

Fig. 2 – 8375 Voltage Selection Jumper Setting

12VDC Operation 24VDC Operation

(Factory Setting)

Electromagnetic lock installations must conform to local fire codes, National

building codes and Life Safety Codes.

Mounting

Bracket

Releases captive

mounting screws

Produktspecifikationer

Varumärke:	Dormakaba
Kategori:	Inte kategoriserad
Modell:	RCI 8375
Färg på produkten:	Crème
Bredd:	900 mm
Djup:	515 mm
Höjd:	840 mm
Ljudnivå:	52 dB
Snäll:	Muurmontage
Motoreffekt:	240 W
Antal motorer:	1
Husmaterial:	Roestvrijstaal
Maximal utsugskapacitet:	700 m³/uur
Extraktionsmetod:	Afvoerend/recirculerend
Antal lampor:	2 gloeilamp(en)
Soort vetfilter:	Metaal
Antal filter:	3 stuk(s)
Antal hastigheter:	3