DPA D:screet Core 4062 Bruksanvisning

DPA mikrofon D:screet Core 4062

Läs gratis den bruksanvisning för DPA D:screet Core 4062 (7 sidor) i kategorin mikrofon. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 7.5 recensioner. Har du en fråga om DPA D:screet Core 4062 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/7

w w w . d p a m i c r o p h o n e s . c o m

Headset Microphones Manual

d:ﬁneTM Omnidirectional

d:ﬁneTM Directional

d:ﬁneTM 4065

d:ﬁneTM 4066

d:ﬁneTM 4067

d:ﬁneTM 4088

d:ﬁneTM 66

d:ﬁneTM 88

w w w . d p a m i c r o p h o n e s . c o m / d f i n e

Omnidirectional characteristics

• The microphone is sensitive to sound from all directions.

• The sound remains more or less the same regardless of

the distance between the sound source and the microphone.

• The positioning of microphones with omnidirectional

characteristics is less critical than with directional.

• An omnidirectional microphone is generally not very

sensitive to wind, breathing and handling noises.

Directional characteristics

• Rejects background noise and creates higher separation.

• The microphone is most sensitive to sound on the side of the chevron.

• The positioning of mics with directional characteristics is essential

as the low frequency level will change according to the distance to the mouth.

Choose a distance which yields the desired amount of bass.

• Care should be taken to protect against wind and pop noise e.g. by using

a windsceen.

Introduction

All the d:ﬁneTM Headset Microphones provide a uniquely natural and open sound.

Ultra-lightweight and adjustable, d:ﬁneTM Headset Mics ensure a secure and

comfortable ﬁt in live performance environments. To ensure optimal performance

of your d:ﬁne Headset Mic, please follow the simple instructions below.

Placement of microphone

For discreet placement, you can bend the microphone boom slightly so that the cap-

sule is as close to the cheek as possible. Do not hold the capsule while bending; bend

the wire boom, making a smooth

curve with your thumb to best ﬁt

the proﬁle of the face.

Mount a directional mic 2 – 3

cm (1 in) from the corner of the

mouth to ensure optimal sound

quality compared to an omnidi-

rectional mic that can be placed

further away from the mouth.

Adjusting the d:ﬁne

4065

4065 is pre-formed but may require adjustment in order to get a tight, ﬁxed position to the back of

the neck. Adjust the steel tube carefully at the curves.

A protection grid is mounted over the microphone head. If clogged with dirt or make-up,

gently remove it and clean it with distilled water.

Adjusting the d:ﬁneTM 4066, 4067, and 4088

The size of the headset mount can easily be adjusted. Change the standard bend by carefully expand-

ing the distance between the earhooks.

To change sides, simply click the boom out of the clips and switch it over to the other side.

The remaining two clips are not used. The soft cable must not be attached into the clips.

Adjusting the d:ﬁne Omnidirectional, d:ﬁne Directional, d

Produktspecifikationer

Varumärke:	DPA
Kategori:	mikrofon
Modell:	D:screet Core 4062
Färg på produkten:	Hout
Vikt:	15100 g
Bredd:	256 mm
Djup:	292 mm
Höjd:	968 mm
Husmaterial:	MDF
Anslutningsteknik:	Bedraad
Genomsnittlig effekt:	87 W
Equalizerinställningar:	Nee
Rekommenderad användning:	Universeel
Impedans:	8 Ohm
Lämplig för utomhusbruk:	Nee
Ljudutgångskanaler:	1.0 kanalen
Högtalarplacering:	Vloer
Antal förare:	3
Bashögtalare:	Ja
Peak Music Power Output (PMPO):	350 W
Frekvensomfång:	34 - 35000 Hz
Känslighet:	89 dB
Förstärkaranslutning (bindande post):	Ja
Diameter woofer:	6 "
Antal basförare:	1
Diameter högtonenhögtalare:	1 "
Antal diskantdrivrutiner:	1
Antal mellanklassförare:	1
Diameter förare i mellanregister:	6 "
Tweeter:	Ja
Crossover frekvens:	1700 Hz
Driver kon material:	Titanium
Rekommenderad förstärkningseffekt (max):	175 W
rekommenderad förstärkningskraft (min):	20 W
Röstspole diameter:	44 mm