Drayton Digistat 2290B Bruksanvisning

Läs gratis den bruksanvisning för Drayton Digistat 2290B (4 sidor) i kategorin Termostat. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 4 recensioner. Har du en fråga om Drayton Digistat 2290B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Programmable Room

Thermostat

Installation Guide

Model: 2290B

1.Remove the front cover by releasing the 2 screws at the

bottom. Mounting holes and electrical connections are

found underneath the hinged black cover (Fig 1).

Before Installation

If you do not have the knowledge to install the

thermostat safely then you must arrange for a

competent electrician or heating engineer to install it

for you. Wiring must conform to the current IEE

regulations.

Prior to commencing the installation you must ensure

the mains supply is switched off.

Digistat

3rd Generation

(Fig 1)

(Fig 3)

(Fig 4)

(Fig 6)

(Fig 7)

(Fig 2)

2.Fix back plate directly onto the wall using suitable wall plugs

and screws or mount over existing wall box (Fig 2).

3.Complete the wiring according to the connection suggestions

4.Close the black hinged terminal cover and replace the front

shown in (Fig 3). For Basic boiler, Combi boiler and Basic

boiler withzone valve applications Digistat withbattery or

mainssupply aresuitable.

For ElectricHeat applicationuse

Digistat

withmains

supply only.

cover by locating the two latches at the top then fasten the

2 screws at the bottom (Fig 4).

(Fig 5)

7.Replace the battery cover (Fig 7).

5.Remove the battery cover by sliding the battery cover at the

bottom downwards (Fig 5).

6.Install the 2 AA batteries provided (Fig 6).

control the room temperature.

8.TheDigistatisnow installedandwill automatically startto

TechnicalHelplineTel:03336000622

Website:www.draytoncontrols.co.uk

Email:[email protected]

UserandInstallationGuide06490308001IssD

Produktspecifikationer