Elac Protek PB-62W Bruksanvisning

Elac Inte kategoriserad Protek PB-62W

Läs gratis den bruksanvisning för Elac Protek PB-62W (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 5.5 recensioner. Har du en fråga om Elac Protek PB-62W eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/6

PB62-W 6-Outlet Smart Surge Protector with Wi-Fi Setup Guide

①

②

PRODUCT FEATURES

USING YOUR SURGE PROTECTOR

1. Ensure the power is o on the devices you will be connecting to the AC outlets on the surge protector.

2. Plug the surge protector into a properly grounded AC wall outlet and turn on the surge protector.

3. Check that the PROTECTED blue LED are illuminated. If the PROTECTED LED is not illuminated, the surge protector is not

operating properly and will not protect your connected devices. Plug your equipment into the outlets on the surge protector

and power on your devices as usual.

4. Plug your equipment into the outlets on the surge protector and power on your devices as usual.

ELAC AMERICAS INC.

1938 N. BATAVIA ST. SUITE K

ORANGE, CA 92865

⑤

④

① Wi-Fi Status LED— If ﬂashing the unit is in setup mode. If solid the

surge protector is connected to Wi-Fi.

② PROTECTED LED—If illuminated, the unit is working properly. If

not illuminated your connected equipment is not being protected.

Contact ELAC Customer Support.

③ Breaker Reset Button—The button should be in the down position

from the factory. In the event that more than 15 Amps the button

will pop-up and will need to be pushed down in order to properly

operate again.

④ Controlled AC Outlets—The outlets are controlled by the Power

Button as well as from the ELAC Protek phone Application. Plug

Equipment directly into these outlets. Do not use an extension

cord, UPS, or power strip.

⑤ Always On AC Outlets—These AC Outlets always supply AC

power.

⑥ Power / Reset Switch—A short press will turn on and o the con-

trolled outlets. If pressed for more than 3 seconds the unit will

enter setup mode.

⑥

CONNECTING THE PB62-W TO YOUR HOME WI-FI NETWORK

1. Download and open the ELAC Protek App from either the iOS App Store or the Google Play Store.

2. In the App create an ELAC Protek account.

3. On the Home Screen Click on “Add Device” .

4. On the next screen choose Auto Scan (Top Right) (Note: 2.4 Ghz Network required).

5. Press and Hold the Power Button on the PB62-W until the Wi-Fi Status light begins ﬂashing.

6. The Device will appear in the Available Devices Found screen.

7. Click Next and Enter your Wi-Fi Network name and Password.

8. The Device should now connect to your home network and be controllable. This process can take up to one minute.

③

Produktspecifikationer

Varumärke:	Elac
Kategori:	Inte kategoriserad
Modell:	Protek PB-62W
Färg på produkten:	Roestvrijstaal
Vattennivåindikator:	Ja
Husmaterial:	Roestvrijstaal
Tillgångar:	1800 W
På / Av knapp:	Ja
Vattentankens kapacitet:	1 l
Automatisk avstängning:	Ja
Sladdförvaring:	Ja
Justerbar termostat:	Nee
Antihalkfötter:	Ja
Trådlös:	Ja
Bas med 360 graders rotationsvinkel:	Ja
Belyst på/av-knapp:	Nee