Elac Protek PR-71S Bruksanvisning

Läs gratis den bruksanvisning för Elac Protek PR-71S (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 35 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9 recensioner. Har du en fråga om Elac Protek PR-71S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

PR71-S 8-Outlet Component Surge Protector Setup Guide

①③②

PRODUCT FEATURES

USING YOUR SURGE PROTECTOR

1. Ensure the power is o on the devices you will be connecting to the AC outlets on the surge protector.

2. Plug the surge protector into a properly grounded AC wall outlet and turn on the surge protector.

3. Check that the PROTECTED and GROUNDED blue LEDs are illuminated. If the PROTECTED LED is not illuminated, the surge

protector is not operating properly and will not protect your connected devices. If the GROUNDED LED is not illuminated the

outlet the surge protector is connected to is not properly grounded and should not be used. Please have a licensed

electrician diagnose and troubleshoot the aected wall outlet prior to use.

4. Plug your equipment into the outlets on the surge protector and power on your devices as usual.

5. USB devices can be charged/powered by simply connecting the USB power cord to the USB ports on the surge protector.

The USB ports deliver 5V and up to 2.4amps of power.

⑤

④

⑥⑦

⑧

⑨⑩⑪

ELAC AMERICAS INC.

1938 N. BATAVIA ST. SUITE K

ORANGE, CA 92865

Copyright 2021 ELAC Americas Inc.

①Power Button—Press this button (.5 sec to 1 sec) to power on and

o the rear AC outlets. Press and hold for 10 seconds to factory reset

the unit.

②Reboot Button—Pressing and holding the REBOOT button for 1.5

seconds will power cycle all outlets in Group 1.

③Dimmer Button—Adjusts the brightness of the LCD and other

LEDs to 10%, 35%, 70% and 100%.

④Voltage Display—Displays the Voltage of the outlet that the surge

protector is plugged into.

⑤LED Indicators— Indicates the status of the surge protector.

• Protected / Clean Power—LED On: Outlets are Protected. LED

O: Surge Protection is not working and your connected devices

are not protected.

• Ground OK—LED On: The wall outlet is properly grounded. LED

O: The wall outlet is NOT properly grounded and a licensed

electrician should be called to resolve the problem.

• Reversed Polarity—LED O: The wall outlet polarity is correct.

LED On: Reverse polarity detected. Please contact a licensed

electrician to resolve the issue.

• Unsafe Voltage—LED O: Normal voltage detected. LED On:

Unsafe voltage detected and the surge protector will disconnect

power to your connected devices. Please consult a licensed

electrician.

⑥Front AC Outlet—This front AC outlet always on unless unsafe

voltage is detected.

⑦Front Outlet Indicator—Front AC outlet power indicator.

⑧Dual USB Charging Ports: 5V 2.4 Amp Total USB-A ports for

charging compatible devices.

⑨Group 2 AC Outlets— These 5 outlets provide 58db of EMI/RFI

filtration and are perfect for source and lower current devices.

⑩Group 1 AC Outlets—These 2 outlets are designed for high current

devices such as audio amplifiers.

⑪Overload Breaker—This breaker will trip when the surge protector

is overloaded. After resetting, please ensure the Protected/Clean

Power LED is On, if not, your surge protector needs to be replaced.

Produktspecifikationer