Electro Harmonix Big Muff Pi 2 Bruksanvisning

Läs gratis den bruksanvisning för Electro Harmonix Big Muff Pi 2 (3 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 5 recensioner. Har du en fråga om Electro Harmonix Big Muff Pi 2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

POWER REQUIREMENTS:

Voltage: 9VDC Current: 15mA Polarity: Center-Negative Battery: 9V

This device may be powered with an Electro-Harmonix 9.6DC-200mA, MOP-D10, or S8 power supply.

It may also be powered with a 9V battery. Use of the wrong adapter or a plug with the wrong

polarity may damage the device and void the warranty. Do not exceed 12VDC on the power plug.

Power supplies rated for less than 50mA can cause the device to act unreliably.

Connect your guitar to the input jack of the Big Mu Pi 2 and the output jack to your

amp’s input. Press the footswitch to ensure the LED is lit. Your BMP2 is now ready

to play.

A good starting point is to set the SUSTAIN and TONE knobs to their 12 o'clock

positions, and the VOL knob to 9 o’clock. Further tweak the knobs to dial-in your

perfect setting.

Welcome to the Electro-Harmonix Big Mu Pi 2,

our legendary hit reimagined. This creamy fuzz

features a long-lost dual op-amp gain circuit from

the 1970s designed by the Mu legend himself,

Bob Myer. The Big Mu Pi 2 delivers its own unique

flavor of fuzz magic while remaining true to the

Big Mu Pi legacy. This pedal has modern upgrades

including a sot footswitch, true bypass, an LED

to indicate eect status, and optionally may be

powered by a standard 9V battery or 9V pedal

power supply.

Operating Instructions

Produktspecifikationer