Emko ESM-1500 Bruksanvisning
Emko
ej kategoriserat
ESM-1500
Läs gratis den bruksanvisning för Emko ESM-1500 (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 1.5 recensioner. Har du en fråga om Emko ESM-1500 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
ESM-1500
Digital Temperature Indicator
- Temperature Measurement
- Economical
- Easy to Use
- DIN RAIL Mounting
SPECIFICATIONS
INPUT
PTC : PTC (1000 @25°C)W
Thermocouple (TC) : J, K (IEC 584.1) (ITS90)
Thermoresistance (RTD) : 2-wire PT 100, PT 1000
(IEC 751)(ITS90)
Measurement Range : It is in ordering information
Accuracy : ±1% of scale
Cold Junction Compensation : Automatically
±0.1°C/1°C
Sensor Break Protection:Upscale
Sampling Cycle :3 samples per second
DISPLAY
Process Display :
ESM-1500 : 9 mm Red 3 digits LED display
NTC : NTC (10k @25°C)W
POWER SUPPLY
Supply Voltage :
230 V ( ±15% ) 50/60 Hz - 1.5VA V
115 V ( ±15% ) 50/60 Hz - 1.5VA V
24 V ( ±15% ) 50/60 Hz - 1.5VA V
24 V ( -15%, + ) 50/60 Hz - 1.5VA W
(Supply voltage must be determined in order)
10%
ENVIRONMENTAL RATINGS and PHYSICAL
SPECIFICATIONS
Operating Temperature: 0...50°C
Humidity : 0-90%RH (none condensing)
Protection Class: IP20
Weigth:
ESM-1500 : 150 gr.
Dimension:
ESM-1500 : 86x 35mm, Depth: 59mm
Mounting:
ESM-1500 : DIN RAIL Mounting Type
Introduction Brochure. ENG ESM-1500 01 V01 05/12
Front Panel
- 3 Digits display
- PTC input or
J Type Thermocouple Input or
K Type Thermocouple Input or
2-wire PT-100 or PT-1000 Input
- Adjustable temperature offset value
NTC input or
Electrical Wiring
If the measured temperature value is lower (bigger) than
the real t value, measured value emperature temperature
can be adjusted by adding offset value.
Offset value is changed by pressing Increment(decrement)
button. For incrementing(decrementing) the offset value
increment(decrement) button must be pressed
continuously. After pressing the Increment(decrement)
button for 10 seconds firstly, the temperature value is
incremented (decremented) 0.1 (for BC=09,13,15,19)
or 1 (for BC=05, 10, 11, 12, 14, 18) per second during
increment (decrement) button is pressing.
°C
°C
Note: There are 2 hidden buttons under the front panel.
Technician must press to the points on the front panel
which are shown above for using decrement and
increment buttons.
Temperature
Indicator
Temperature Calibration
A BC D E FG HI /
/
U
V W Z/
/
0 00 1 0 0
ESM-1500
00
Temp.Sensor which is given with ESM 1500
V
Supply VoltageA
Input Type
BC
Scale(°C)
24V ( ± 15% ) 50/60Hz V
3
115V ( ± 15% ) 50/60Hz V
4
230V ( ± 15% ) 50/60Hz V
5
0
None
24V ( -15%, + ) 50/60Hz 10%W
2
1
PTC-M6L40.K1.5 (PTC Air probe with 1.5 m silicon cable)
2
PTCS-M6L30.K1.5.1/8”(PTC Liquid probe with 1.5 m silicon cable)
3
NTC-M5L20.K1.5 (NTC Probe, thermoplastic moulded with
1.5 m cable for cooling application)
12
05
09
J ,Fe CuNi IEC584.1(ITS90)
PTC (Note-1)
-50°C 150°C
0°C 800°C
-19.9°C 99.9°C
PT 100 , IEC751(ITS90)
10
K ,NiCr Ni IEC584.1(ITS90)
-50°C 400°C
0°C 999°C
11
PT 100 , IEC751(ITS90)
14
-50°C 400°C
PT 1000 , IEC751(ITS90)
13
-19.9°C 99.9°C
PT 1000 , IEC751(ITS90)
15
PTC (Note-1)
-19.9°C 99.9°C
0
Ordering Information
ESM-1500
°C
Temperature Indicator
Hidden Increment
button
Hidden Decrement
button
Temperature
Display
TC
Temperature Sensor Input
PTC, N PT-100, PT- 1000TC,
21
6
7
N
L
1A T
Fuse
230V V
115V V
24V V
24V W
230V , 115V , 24V , 24V supply voltages V V V W
ESM-1500
°C
Temperature Indicator
Power
Supply
Switch
ESM-1500
ESM-1500
ESM-1500
ESM-1500
ESM-1500
4
NTC-M6L50.K1.5 (NTC Probe, stainless steel housing with
1.5 m cable for cooling application)
9
Customer
18
-50°C 100°C
NTC (Note-1)
19
-19.9°C 99.9°C
NTC (Note-1)
Note-1 : If input type is selected PTC or NTC (BC = 12, 15, 18, 19 ),
Temperature sensor is given with the device. For this reason,
If input type is selected as PTC, sensor type (V = 0,1 or 2) or
If input type is selected as NTC, sensor type (V = 0,3 or 4) must be
declared in ordering information.
Produktspecifikationer
| Varumärke: | Emko |
| Kategori: | ej kategoriserat |
| Modell: | ESM-1500 |
Behöver du hjälp?
Om du behöver hjälp med Emko ESM-1500 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Emko Manualer
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
ej kategoriserat Manualer
- UNITEK
- IOGEAR
- Hansgrohe
- Olimpia Splendid
- Burg Wächter
- Tiger
- Siemens
- Leviton
- NAD
- Schlage
- Crown
- Ermenrich
- Konica Minolta
- AEG
- Posiflex
Nyaste ej kategoriserat Manualer
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025