Emko ESM-9945 Bruksanvisning

Emko Ugn ESM-9945

Läs gratis den bruksanvisning för Emko ESM-9945 (3 sidor) i kategorin Ugn. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Emko ESM-9945 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

- J type thermocouple,

K type thermocouple,

PT-100 2-wire or 3-wire temperature input

( Must be determined in order ),

- On/Off or Proportional control form selection,

- Working time selection in minutes or seconds,

- Hysteresis adjustment,

- Voiced warning via internal buzzer,

- Cover switch input,

- Steam output (ESM- 9945)

SPECIFICATIONS

INPUT

Thermocouple (TC) : J, K (IEC 584.1) (ITS90)

Thermoresistance (RTD) : 2 or 3 wire PT 100 (IEC

751) (ITS90)

Measurement Range : It is in ordering information

Accurary : ± 1% of full scale

Cold Jonction Compensation : Automatically

±0.1°C/1°C

Sensor Break Protection: Upscale

Sampling Cycle: 3 samples per second

CONTROL

Control Form : ON/OFF & PROPORTIONAL

OUTPUTS

Temperature Control Output :

Relay (7A@250V @ resistive load) or optionalV

SSR Driver Output (Maximum 20mA, 12V )Z

Time Output:

Relay (7A@250V @ resistive load) or optionalV

SSR Driver Output (Maximum 20mA, 12V )Z

Steam Output(ESM-9945):

Relay (7A@250V @ resistive load) or optionalV

SSR Driver Output (Maximum 20mA, 12V )Z

Besides these, there is an internal buzzer for voiced

warning.

SUPPLY VOLTAGE

230 V ( %±15 ) 50/60 Hz - 4VA ,V

115 V ( %±15 ) 50/60 Hz - 4VA ,V

24 V ( %±15 ) 50/60 Hz - 4VA V

(Must be determined in order).

ENVIRONMENTAL RATINGS and PHYSICAL

SPECIFICATIONS

Operating Temperature : 0...50°C

Humidity : %0-90RH (none condensing)

Protection Class : IP65 at front, IP20 at rear

Weight : 360 gr.

Diemensions: 96 x 96 mm, Depth:96 mm

Panel Cutout: 92 x 92 mm

Introduction Brochure. ENG ESM-994X 01 V07 07/23

ESM-9944

ESM-9945

Cooking Controllers

APPLICATION FIELDS

- Bakery Applications,

- Fermentation Cabinets,

- Ceramics and Glass ovens,

- Grain drier cabinet,

- Industrial fryer,

- Incubators

DISPLAY

Temperature Value Display :

14 mm red 3 digit LED Display

Temperature Set Value Display :

8 mm green 3 digit LED Display

Time Value Display :

14 mm red 2 digit LED Display

Time Set Value Display :

8 mm green 2 digit LED Display

ELECTRICAL WIRING

DIP- SWITCH ADJUSTMENTS

ONOFF

S2S2

HYSTERESIS SELECTION

HYSTERESIS SELECTIONHYSTERESIS SELECTION

ONON

OFF

OFFOFF

ONON

OFF

OFFOFF

INPUT TYPE

INPUT TYPEINPUT TYPE

HYSTERESIS

HYSTERESISHYSTERESIS

ONON

OFF

OFFOFF

0- 400°C

0- 400°C0- 400°C

0- 400°C

0- 400°C0- 400°C

0- 800°C

0- 800°C0- 800°C

0- 800°C

0- 800°C0- 800°C

0- 999°C

0- 999°C0- 999°C

0- 999°C

0- 999°C0- 999°C

1°C

1°C1°C

4°C

4°C4°C

2°C

2°C2°C

4°C

4°C4°C

2°C

2°C2°C

4°C

4°C4°C

S3S3

TIME UNIT SELECTION

TIME UNIT SELECTIONTIME UNIT SELECTION

ONON

OFF

OFFOFF

SECOND (1- 99 sec)

SECOND (1- 99 sec)SECOND (1- 99 sec)

MINUTE (1- 99 min )

MINUTE (1- 99 min )MINUTE (1- 99 min )

S4S4

RELA

RELARELAY ON DURA

Y ON DURA

Y ON DURAY ON DURATION

TION

TIONTION

ONON

OFF

OFFOFF

10 sec

10 sec10 sec

CONTINUOUSL

CONTINUOUSLCONTINUOUSLY

S1S1

CONTROL FORM

CONTROL FORMCONTROL FORM

ONON

OFF

OFFOFF

ON- OFF

ON- OFFON- OFF

PROPORTIONAL

PROPORTIONALPROPORTIONAL

Pt100

Pt100Pt100

Pt100

Pt100Pt100

J, Fe CuNi

J, Fe CuNiJ, Fe CuNi

J, Fe CuNi

J, Fe CuNiJ, Fe CuNi

K, NiCr Ni

K, NiCr NiK, NiCr Ni

K, NiCr Ni

K, NiCr NiK, NiCr Ni

SCALE

SCALESCALE

LED Display :

OUT1: Red,

OUT2: Red,

TIME: Red,

STEAM: Red (ESM-9945),

MIN: Green,

SEC: Green

Fuse

CAT II

ESM-9945

Temperature

Sensor Input

(TC or PT-100)

Output-1

1 2 3 8 9 10 11 12 13

Digital Input

7A@250VV7A@250VV

Output-2

1A TV

6 7

7A@250VV

Output-3

Temperature

Control

Output

Time

End

Output

Steam

Output

( ) ( )( )

Cover

Switch

( )

230VV

Pt-100

Power

Supply

Switch

Fuse

CAT II

ESM-9944

Temperature

Sensor Input

(TC or PT-100)

Output-1

1 2 3 8 9 10 11 12 13

Digital Input

7A@250VV7A@250VV

Output-2

1A TV

Temperature

Control

Output

Time

End

Output

( )( )

Cover

Switch

( )

230VV

Pt-100

Power

Supply

Switch

Cooking

Controllers

CHANGING THE SET VALUES

In anytime, temperature and time set values can be changed by pressing

related increase or decrease buttons.

TEMPERATURE SET(°C) TIME SET(min./sec.)

°C

Display View

Increase the

time set

value

Decrease the

time set

value

Decrease the

temperature set

value

Increase the

temperature set

value

FRONT PANEL ESM9945

Time value

Time set value

Temperature

value

Temperature set

value

Output info indicators

Time unit indicators

Used to decrease

time set value

Used to increase

temperature set value

Used to decrease

temperature set value

Used to increase

time set value

Start button

Starts cooking time.

Steam button

(ESM9945)

HIDDEN PARAMETERS

If the control form is proportional, it is possible to access the hidden parameters.

In the proportional form, if the stop button is pressed during 60 seconds the hidden

parameters will be accessed.

The stop button is pressed for saving current parameter and passing to next

parameter. When in the last parameter and the stop button is pressed then user

leave the parameter screen and the main screen is appeared.

To change parameter set value, temperature set increase or temperature set

decrease buttons are used.

HIDDEN PARAMETERS DEFINITION and FLOWCHARTS

Proportional Band Parameter :

Range : 1- 100 %

Control Output Period Parameter :

Range : 1- 50 sec.

Set Value Offset Parameter :

Range : 0- +19 C

Timer count direction Parameter:

Range : 0- 1. If the parameter is 1 then timer counts up-to-down.

If the parameter is 0 then timer count down-to-up.

Set value Up Limit Parameter:

Range : 0- Scala (Changes with input type).

Timer Relay Position Parameter:

Range : 0-1

If the parameter is 1, then Timer relay become active position with the

time start and becomes passive at the end of the time. If the parameter is 0, then

time relay becomes active at the end of the time.

Display Set Value Offset for Process Value Overflow Parameter :

Range : 0 - +20 C.

If the parameter is not 0, then the process value remains constant at

SET + on the display.

Steam Duration Parameter (ESM-9945):

Range : 0- 99 sec.

If the Steam Duration Parameter is selected as zero then the steam output wil be on

during the Steam button is pressed. If the parameter value is different from zero,

after pressing the steam button, output will be on during the Steam Duration

Parameter value. If Steam button is pressed when steam output is on, steam output

will be off.

°°

Cooking Controller

Cooking ControllerCooking Controller

ESM-9945

OUT1

min.

sec.

TEMPERA

TEMPERATEMPERATURE SET(°C)

TURE SET(°C)

TURE SET(°C)TURE SET(°C) TIME SET(min./sec.)

TIME SET(min./sec.)

TIME SET(min./sec.)TIME SET(min./sec.)

°C

°C°C

°C

°C°C

OUT2

Stop button

Cooking time is cancelled and buzzer is

silenced. In addition, it is used to access

hidden parameters. It is also used to

access to next parameter. It saves the

changing parametres and return to the

main screen.

Pressed for 60 second

ESM-9945:

ESM-9944:

S1: OFF

S1: ON

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

S1: OFF

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

Pressed for 60 second

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

°C

°C°C

°C

°C°C

TEMPERATURE SET(°C)

ORDERING INFORMATION

A BC D E FG HI /

V W Z/

0 1 0 0 0

Relay Output (7A@250V r , 1 NO)V@esistive load

Output-1

Supply VoltageA

J ,Fe CuNi IEC584.1(ITS90)

K ,NiCr Ni IEC584.1(ITS90)

Input Type

Scale(°C)

0°C

400°C

0°C

800°C

0°C

999°C

PT 100 , IEC751(ITS90)

ESM-9945 (96x96 DIN 1/4)

24V ( ± 15%) 50/60Hz V

Customer

115V ( ± 15% ) 50/60Hz V

230V ( ± 15% ) 50/60Hz V

SSR Driver Output ( Maximum 20mA, 12V )Z

Output-2

SSR Driver Output ( Maximum 20mA, 12V )Z

Relay Output (7A@250V r , 1 NO)V@esistive load

Output-3

SSR Driver Output ( Maximum 20mA, 12V )Z

Relay Output (7A@250V r , 1 NO)V@esistive load

Temperature Control Output

Time Output

Steam Output (ESM-9945)

A BC D E FG HI /

V W Z/

0 1 0 0 0

ESM-9944 (96x96 DIN 1/4)

Manufacturer Information:

Emko Elektronik Sanayi ve Ticaret A.Ş.

Bursa Organize Sanayi Bölgesi, (Fethiye OSB Mah.)

Ali Osman Sönmez Bulvarı, 2. Sokak, No:3 16215

BURSA/TURKEY

Phone : +90 224 261 1900

Fax : +90 224 261 1912

Repair and Maintenance Service Information:

Emko Elektronik Sanayi ve Ticaret A.Ş.

Bursa Organize Sanayi Bölgesi, (Fethiye OSB Mah.)

Ali Osman Sönmez Bulvarı, 2. Sokak, No:3 16215

BURSA/TURKEY

Phone : +90 224 261 1900

Fax : +90 224 261 1912

Other Informations

Your Technology Partner

Thank you very much for your preference to use Emko Elektronik products, please visit our

web page to download detailed user manual.

www.emkoelektronik.com.tr

Produktspecifikationer

Varumärke:	Emko
Kategori:	Ugn
Modell:	ESM-9945

Behöver du hjälp?

Om du behöver hjälp med Emko ESM-9945 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Ugn Emko Manualer

Emko ESM-9945 Bruksanvisning

20 Juni 2025

Ugn Manualer

Nyaste Ugn Manualer

Omega OBO606M Bruksanvisning

20 Juni 2025

Omega OBO888BD Bruksanvisning

20 Juni 2025

Omega OS450X Bruksanvisning

20 Juni 2025

Omega SQ5280687 Bruksanvisning

20 Juni 2025

Omega OO653X Bruksanvisning

20 Juni 2025

Omega OBO9010AMCOM Bruksanvisning

20 Juni 2025

Omega OBO690TGG Bruksanvisning

20 Juni 2025

Omega OBOS605B Bruksanvisning

20 Juni 2025

Glem Gas GL53EI Bruksanvisning

20 Juni 2025

Vox EBM2110B Bruksanvisning

20 Juni 2025