Ergotron ZET26CG Bruksanvisning
Ergotron
Inte kategoriserad
ZET26CG
Läs gratis den bruksanvisning för Ergotron ZET26CG (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2.5 recensioner. Har du en fråga om Ergotron ZET26CG eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
A S S E M B LY I N S T R U C T I O N S
Anthro Corporation® | 10450 SW Manhasset Dr. | Tualatin, OR 97062
Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com
Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409
26" Extension Tube
for Zido® and POC-2
Rev B, August 2013
NOTE: The Zido cart is not included.
Product Part#
Zido Extension Tube ZET26SB
WELC O ME
Thank you for purchasing this
26" Extension Tube!
If you have any questions or if we
can help you in any way, please
contact us at 800.325.3841.
NOTE
A 7/32" drill bit and electric drill
are required for this assembly.
A 3-way wrench is supplied for
this assembly. If you have a 3/8"
wrench or socket, use that instead.
PAR TS L I S T
Before beginning assembly of your 26" Extension Tube,
please review the parts list to verify that your shipment is
complete.
2
Zido Extension Tube Quantity Part Number
01 Extension Tube 26" 1 500-1034-00
02 Nylock Nuts 4 325-5233-00
03 End Cap 1 175-5235-32
03
01
02
26" Extension Tube Assembly Instructions 3
STEP 1
Drill the Top
¡ Place the cart shelf upside down on a
non-marring surface that can stand to
have some holes drilled into it.
¡ Locate the Extension Tube hole array of four
1/8" holes.
¡ Drill through these holes with
the 7/32” drill bit.
¡ Complete your cart assembly.
STEP 2
Install the Extension Tube
¡ Align the Extension Tube with the holes on
the top of your cart. Make sure that the
vertical hole array on the Extension Tube
face the back of the cart.
¡ Slide the Extension Tube into place. Use the
3-way wrench (or your own 3/8" socket or
wrench) to secure with the four nylock nuts.
¡ Pop the End Cap into place.
CONGRATULATIONS! YOUR EXTENSION TUBE ASSEMBLY IS COMPLETE!
Ext Tube hole array
Nylock Nut 10-32
325-5233-00
Ext Tube hole array
Zido POC Cart 2
Produktspecifikationer
| Varumärke: | Ergotron |
| Kategori: | Inte kategoriserad |
| Modell: | ZET26CG |
Behöver du hjälp?
Om du behöver hjälp med Ergotron ZET26CG ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Ergotron Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
Inte kategoriserad Manualer
- Burley
- Kenko
- K&M
- Tech 21
- Digital Juice
- Palmer
- Ibico
- Valeo
- FeiyuTech
- Morningstar
- TC Electronic
- Tzumi
- Rosseto
- Mauser
- ETC
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025