Fantini Cosmi CH175 Bruksanvisning
Fantini Cosmi
Termostat
CH175
Läs gratis den bruksanvisning för Fantini Cosmi CH175 (2 sidor) i kategorin Termostat. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 3.5 recensioner. Har du en fråga om Fantini Cosmi CH175 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
1 RELAY WIRELESS ACTUATOR FOR SYSTEM
The CH175 unit is an actuator module which, connected to the Intellicomfort+ wireless network, allows a remote control of the boiler or the zone solenoid-
valve. The CH175 module also provides to the wireless repeater functionality, extending the radio range of the Intellicomfort+ wireless network.
SCOPE OF DELIVERY
1 CH175 actuator, 1 two poles removable terminal block, 1 three poles removable terminal block and this installation manual.
INSTALLATION AND CONNECTION
The installation must be carried out by qualied personnel, in compliance with the requirements concerning the installation of electrical devices. Make sure
that the power network is disconnected before making any connection or working on the device.
Make the electrical connections as shown in the picture 2 or 3 with the connection diagrams examples.
Notes
WARNING:The “L1” pole of the output terminal block is connected on the PCB board with the “L” pole of the power terminal block.
To control units with “free voltage contact”, adopt the connection example of the picture 2.
To control units with “powered contact”, adopt the connection example of the picture 3.
Picture 1
Picture 2 Picture 3
TECHNICAL DATA
²
Power supply: 230Vca ±10% - 50Hz
Power consumption: 20VA max (load excluded)
Transceiver frequency: 868MHz
Relay contacts rating: 16(4)A – 250Vca
Maximum cables size: 2,5 mm²
Degree of protection: IP20;
Operating temperature: 0 ÷ 50°C;
Storage temperature: -20 ÷ +70°C;
Shape type: gray ABS plastic;
Dimensions: 36x58x90 mm. - DIN-rail (2 modules)
Responding to Directive 2014/53 / EU (RED).
5679633C
COMMISSIONING AND NETWORK INCLUSION
The CH175 actuator, after power up, will work only after the INTELLICOMFORT+ wireless network inclusion step.
For this procedure it’s necessary to use a special Programmer tool (p/n 1590880) that provides all instructions by display
messages. When required, will be necessary to touch the “X” area of the actuator with the tool (see picture 4). For more details,
please refer to the wireless INTELLICOMFORT+ system manual.
ATTENTION!
pdf.fantinicosmi.it
ATTENZIONE!
http://www.fantinicosmi.it
Produktspecifikationer
| Varumärke: | Fantini Cosmi |
| Kategori: | Termostat |
| Modell: | CH175 |
Behöver du hjälp?
Om du behöver hjälp med Fantini Cosmi CH175 ställ en fråga nedan och andra användare kommer att svara dig
Termostat Fantini Cosmi Manualer
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
30 September 2024
12 September 2024
10 September 2024
10 September 2024
Termostat Manualer
- PECO
- Dimplex
- Oertli
- Brink
- Wattio
- AEG
- Enda
- Niko
- Vasco
- ThermoSmart
- Schwaiger
- Elro
- Hama
- Elektrobock
- Extraflame
Nyaste Termostat Manualer
17 Juni 2025
14 Juni 2025
9 April 2025
7 April 2025
7 April 2025
6 April 2025
6 April 2025
6 April 2025
5 April 2025