Festo SD-SUB-D-BU9 Bruksanvisning
Festo
Inte kategoriserad
SD-SUB-D-BU9
Läs gratis den bruksanvisning för Festo SD-SUB-D-BU9 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 4.5 recensioner. Har du en fråga om Festo SD-SUB-D-BU9 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
1 Applicable Documents
All available documents for the product www.festo.com/sp.è
2 Safety
2.1 Safety instructions
– Do not connect or disconnect plug connector when powered.
– Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended Use
Socket SUB-D for multi-pin plug connection, can be freely assembled.
2.3 Training of qualified personnel
Work on the product may only be carried out by qualified personnel who can eval-
uate the work and detect dangers. The qualified personnel are trained in electrical
engineering.
3 Product Range Overview
3.1 Scope of delivery
1
Cable fitting (1x)
2
Screw (2x)
3
Contact holder (1x)
4
Cover (1x)
5
Spring loaded contact (9x/25x)
Fig. 1
3.2 Not in scope of delivery
6
Cable
Fig. 2
4 Assembly
Fig. 3
1. Disconnect cable fitting .1
2. Guide cable through the cable fitting and the cover .6 1 4
3. Strip cable approx.40mm.
4. Strip insulation from wires approx.3mm.
5. Crimp spring loaded contacts to wires.5
The contact holder can be mounted in two different positions. The cable outlet dir-
ection of the mounted socket depends on the orientation of the contact holder.
Fig. 4
6. Align the contact holder in accordance with the desired cable outlet direc-3
tion.
Fig. 5
7. Insert the wires with the spring loaded contacts into the contact holder 5 3
and engage.
8. Pull the cable back so that a piece of cable sheath remains within the cov-6
er .4
Fig. 6
9. Place the contact holder in the cover . Avoid cable twist during insertion.3 4
10. Tighten cable fitting .1
11. Fasten the contact holder so that it is floating using the two screws .3 2
5 Technical data
SD-SUB-D-... BU9 BU25
Cable diameter D [mm] 6 ... 9 7 ... 12
Cable fitting Pg9 Pg11
Type of mounting 2 screws M3x16
Mounting position any
Nominal operating voltage DC U
B
[V] 24
Current rating [A] 5
Material
Housing PA
Tab. 1 Technical data
8138547
SD-SUB-D-BU9/-BU25
Plug socket
8138547
2021-01a
[8138549]
Assembly instructions
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Produktspecifikationer
| Varumärke: | Festo |
| Kategori: | Inte kategoriserad |
| Modell: | SD-SUB-D-BU9 |
Behöver du hjälp?
Om du behöver hjälp med Festo SD-SUB-D-BU9 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Festo Manualer
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
Inte kategoriserad Manualer
- Dupla
- Laney
- Waterco
- Easyrig
- Polisport
- Herkules
- Kaiser Nienhaus
- Bayco
- NovaStar
- DAB
- AV Tool
- Exelpet
- Sonnet
- Fire Sense
- Bulman
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025