Gemini Play2Go Bruksanvisning

Läs gratis den bruksanvisning för Gemini Play2Go (1 sidor) i kategorin Vagga/dockningsstation. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 5.5 recensioner. Har du en fråga om Gemini Play2Go eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
W W W.G E M I N I S O U N D.C O M
Q U I C K S TA R T G U I D E
G E M I N I P L AY 2G O
Q U I C K S E T U P
B o x C o n TA I n S T h E f o l l o w I n G :
PLAY2GO Portable PA
(1) Microphone + cable
(1) Power Cable
1. Place the PLAY2GO in the desired location for operation and plug it into a power source or verify the battery is fully
2. Turn the volume levels on the PLAY2GO down prior to turning the unit on or connecting any input sources.
3. Power On the PLAY2GO.
4. Connect any audio input sources by referencing the setup diagram:
Bluetooth – Press the Bluetooth button for 3 seconds and the blue led will blink and several beeps will be heard as it
locates another device to connect with. Then consult your device’s operating instructions for finding and connecting to
another Bluetooth device.
USB – Plug your USB Memory Stick into the correct input and use the controls on the MP3 Player to find and play tracks
SD - Plug your SD Card into the correct input and use the controls on the MP3 Player to find and play tracks
Microphone Inputs – Connect a 1/4” Microphone cable to the input.
AUX Input – Stereo RCA or Stereo RCA to 1/8” cords can be used to connect an external MP3 player or another device.
5. Begin playback on desired device (Begin with the volume low in order to find the ideal level settings on the PLAY2GO
and your input source).
6. Turn the volume on the PLAY2GO inputs and master volume up to the desired level.
Microphone Volume
Aux Input Volume
Master Volume
MP3 Player Controls:
Volume +/- , Play/Pause,
Track Search, Mode
Mic 1 & 2 Input:
Connect a
microphone or
instrument via
1/4” cable
Aux Input:
Connect an
RCA input
Bluetooth
Enable
SD/USB Input
Battery
Indicator
Power
Connector/
Switch

Produktspecifikationer

Varumärke: Gemini
Kategori: Vagga/dockningsstation
Modell: Play2Go
Vikt: 13050 g
Bredd: 425 mm
Djup: 327 mm
Höjd: 500 mm
LED-indikatorer: Ja
Snabbstartsguide: Ja
Volymkontroll: Rotations-
Rekommenderad användning: Universal
Impedans: - Ω
Ljudutgångskanaler: - kanaler
Förstärkare: Inbyggd
Produktdesign: Rektangel
Batterityp: Inbyggd
Typ av minneskort: MMC, SD
Produktens färg: Svart
Skärmtyp: Analog
Antal per förpackning: 1 styck
Inbyggd kortläsare: Ja
Uteffekt (RMS): 50 W
diskanthögtalare: Ja
Kabel inkluderad: AC
Frekvensområde: - hz
Anslutningsteknologi: Kabel & Trådlös
Strömkälla av typen: AC, Battery
Strömingång: Ja
På / av-knapp: Ja
Subwoofer ingår: Ja
Antal USB 2.0 anslutningar: 1
Woofer diameter (imperial): 8 "
Bluetooth: Ja
Drifttid för batteri: 12 h
Uttag för mikrofon/linje in: Ja
Antal talare: 1
Högtalartyp: 2-vägs
Aux-In: Ja
Disktanthögtalare diameter: 1 "

Behöver du hjälp?

Om du behöver hjälp med Gemini Play2Go ställ en fråga nedan och andra användare kommer att svara dig




Vagga/dockningsstation Gemini Manualer

Vagga/dockningsstation Manualer

Nyaste Vagga/dockningsstation Manualer