Gigabyte GA-7N400V Pro Bruksanvisning

Gigabyte moderkort GA-7N400V Pro

Läs gratis den bruksanvisning för Gigabyte GA-7N400V Pro (112 sidor) i kategorin moderkort. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 6.5 recensioner. Har du en fråga om Gigabyte GA-7N400V Pro eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/112

When you installing AGP card, please make sure the following notice

is fully understood and practiced. If your AGP card has "AGP 4X/8X

(1.5V) notch"(show below), please make sure your AGP card is AGP

4X/8X.

Caution: AGP 2X card is not supported by nVIDIA

nForce

™

2 IGP/SPP.

You might experience system unable to boot up normally. Please

insert an AGP Pro 4X/8X card.

Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X

mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V) mode

by adjusting the jumper. The factory default for this card is 2X(3.3V). The

GA-7NNXPV / GA-7NNXP / GA-7N400V Pro / GA-7N400 Pro / GA-7N400-

L1 (or any AGP Pro 4X/8X only) motherboards might not function properly, if

you install this card without switching the jumper to 4X(1.5V) mode in it.

Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",

the graphics card manufacturer & some SiS 305 cards, their golden finger is

compatible with 2X(3.3V) / 4X(1.5V) mode AGP slot, but they support

2X(3.3V) only. The GA-7NNXPV / GA-7NNXP / GA-7N400V Pro / GA-7N400

Pro / GA-7N400-L1 (or any AGP Pro 4X/8X only) motherboards might not

function properly, If you install this card in it.

Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage

128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)

specification. Therefore, AG32S(G) will work fine with nVIDIA

nForce2 IGP/

SPP based motherboards.

Before you install PCI cards, please remove the Dual BIOS label from PCI

slots if there is one.

AGP 4X/8X notch

Produktspecifikationer

Varumärke:	Gigabyte
Kategori:	moderkort
Modell:	GA-7N400V Pro
Färg på produkten:	Zwart
Bredd:	437 mm
Djup:	74 mm
Höjd:	682 mm
Förpackningens vikt:	4170 g
Placering:	TV bracket, Wall
Justerbar i höjdled:	Ja
Lämplig för skärmstorlekar:	46 - 65 "
Maximal viktkapacitet:	15.9 kg
Certifiering:	TAA
Antal per paket:	1 stuk(s)
Kompatibilitet:	Chief PNR, Chief PDR, Chief PIW, Chief PWR, Chief MIW, Chief MWR, Chief MWH, Chief PCS, Chief MCS, Chief PFC, Chief PAC525F-KIT, Chief MFC, Chief MF1, Chief FSRV, Chief FTRV
Rotationsvinkel:	10 °
Antal-produkter-ingår:	1 stuk(s)
Maximal skärmstorlek:	65 "
Harmoniserad systemkod (HS):	85189000
Minsta skärmstorlek:	46 "
Höjdjusteringsområde:	434 - 605 mm