Gigabyte GA-8IRE Bruksanvisning


Läs gratis den bruksanvisning för Gigabyte GA-8IRE (47 sidor) i kategorin moderkort. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 6.5 recensioner. Har du en fråga om Gigabyte GA-8IRE eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/47
When you installing AGP card, please make sure the follow
ing notice is fully understood and practiced. If your AGP
card has "AGP 4X notch"(show below), please make sure
your AGP card is AGP 4X (1.5V).
Do not use AGP 2X card (3.3V) in this motherboard. It will
burn and damage the motherboard due to Intel
®
845
/ Intel
®
850 chipset can't support AGP 2X(3.3V).
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/
4X mode AGP slot. It can be switched between AGP 2X (3.3V) or 4X
(1.5V) mode by adjusting the jumper. The factory default for this card is
2X(3.3V). If you install this card in GA-8IRE (or any AGP 4X only)
motherboards without switching the jumper to 4X mode (1.5V), it will
burn the motherboard.
Example 2: Some ATi Rage 128 Pro graphics cards made by Power
Color, the graphics card manufacturer & some SiS 305 cards, their
golden finger is compatible with 2X/4X mode AGP slot, but they support
2X (3.3V) only. If you install these cards in Intel
®
845 / Intel
®
850 based
motherboards, they will burn the motherboard.
Note : Although Gigabyte's AG32S graphics card is based on ATi Rage
128 Pro chip, the design of AG32S is compliance with AGP 4X (1.5V)
specification. Therefore, AG32S will work fine with Intel
®
845 /
Intel
®
850 based motherboards.


Produktspecifikationer

Varumärke: Gigabyte
Kategori: moderkort
Modell: GA-8IRE

Behöver du hjälp?

Om du behöver hjälp med Gigabyte GA-8IRE ställ en fråga nedan och andra användare kommer att svara dig