Gravity MA 3D A POP Bruksanvisning

Gravity mikrofon MA 3D A POP

Läs gratis den bruksanvisning för Gravity MA 3D A POP (2 sidor) i kategorin mikrofon. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10.5 recensioner. Har du en fråga om Gravity MA 3D A POP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Gravity

is a registered brand of the Adam Hall Group

Adam Hall GmbH | Adam-Hall-Str. 1

61267 Neu-Anspach | Germany

Phone: +49 60 81 · 94 19-0

adamhall.com

SAFETY INFORMATION

1. Please read these instructions carefully before you start installation

and assembly.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Observe all safety warnings. Never remove safety warnings or other

information from the equipment.

5. Be attentive when setting up the product and protect yourself from injury.

6. This product is intended for indoor use only. Using it outdoors could lead to

product failure and personal injury.

7. Do not modify this equipment.

8. Comply with all applicable disposal laws in your country. During disposal

of packaging, please separate plastic and paper/cardboard.

9. Plastic bags must be kept out of reach of children.

10. If you have any questions refering to this instruction or any warnings,

please contact your local distributor.

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY

You can find our current warranty conditions and limitation of liability at:

https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-

TIONS_GRAVITY.pdf

To request warranty service for a product, please contact Adam Hall GmbH,

Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /

49 (0) 6081 / 94 19-0

PROPER DISPOSAL OF THIS PRODUCT

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)

(Valid in the European Union and other European countries with waste

separation)

This symbol on the product, or the documents accompanying the product,

indicates that this appliance may not be treated as household waste. This is

to avoid environmental damage or personal injury due to uncontrolled waste

disposal. Please dispose of this product separately from other waste and

have it recycled to promote sustainable economic activity.

TRAVELER 3D ARM

WITH POP FILTER · MA 3D A POP 1

FEATURES

• Pop filter with double nylon mesh

• Large screen diameter of 157 mm

• Tilt and rotation of joints can be adjusted

• Flexible clamping range from 15 mm to 35 mm

• Easy to handle

DESCRIPTION

The Traveler Series’ Pop Filter with 3D Arm

Every bit of weight counts when you’re travelling by plane or truck from

one gig to the next. After all, you can’t always rely on the concert venue

having the right tool available for you when needed.

The Pop Filter with 3D Arm MA 3D A can be taken everywhere you go. It’s so

light and space-saving, there’s absolutely no need for you to worry about

weight or storage space.

With this tool you can enhance your voice- and vocal recordings by placing

the high-qualit y pop filter, with double nylon mesh and a large screen

diameter of 15.7 cm between you and your microphone. This way you

avoid unwanted pop noises and clipping.

Its fastening mechanism is quick and easy to assemble. The large clamping

range from 15 to 35 mm lets you mount it on all popular microphone stands,

and the three joints’ 360° rotation options allow you to install it as you like.

Simply loosen, adjust and tighten the wing-screws. Voila - you’re all done!

Once set, the MA 3D A POP 1 stays locked in place.

Gravity

has once again delivered a small, useful and reliable product for

you to round off your collection of stands.

Product number GMA3DAPOP1

Product type Microphone Accessories

Type Pop lter

Material Plastic, Polyamide

Color Black

Joint adjustment Wing screw

Joint rotation 360˚

Joint tilt 180˚

Arm lenght 400 mm

Suitable for mounting on Microphone Stands

Thread size 3/8"

Screen diameter 157 mm

Setup Double nylon screen, plastic frame

Fits tube diameters up to 15 mm - 35 mm

Weight 0.377 kg

SPECIFICATIONS

Produktspecifikationer

Varumärke:	Gravity
Kategori:	mikrofon
Modell:	MA 3D A POP
Typ av operation:	Knoppen
Färg på produkten:	Wit
Inbyggd display:	Ja
Bredd:	60 mm
Djup:	166 mm
Höjd:	211 mm
Sladdlängd:	2 m
Tillgångar:	70 W
Internationell säkerhetskod (IP):	IP20
Strömförbrukning (i standby):	0.35 W
Maximal viktkapacitet:	45 kg
Certifiering:	CE
Maximalt vridmoment:	10 Nm
Displaybelysning:	Ja
skyddsklass:	II
Rotationshastighet:	30 RPM
Lätt att installera:	Ja
AC-ingångsspänning:	230 V
AC-ingångsfrekvens:	50 - 60 Hz
Drifttemperatur (TT):	0 - 40 °C
Typ produkt:	Rolluikbediening
Kortlivat sällskap:	4 min
Programmerbar timer:	Ja
Rulljalusiyta:	6 m²
Väderrapporter:	Ja
Standbytid vid strömavbrott:	8 uur