Greisinger GFTB 200 Bruksanvisning
Greisinger
Inte kategoriserad
GFTB 200
Läs gratis den bruksanvisning för Greisinger GFTB 200 (12 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 5 recensioner. Har du en fråga om Greisinger GFTB 200 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
H .0. C-03 62 21.6
GREISINGER
GREISINGER
GREISINGER
GREISINGERGREISINGER electronic Gm
electronic Gm
electronic Gm
electronic Gm electronic GmbH
bH
bH
bH bH
D - 93128 Regenstauf, Hans-Sachs-Straße 26
+49 (0) 9402 / 9383-0 +49 (0) 9402 / 9383-33 info@greisinger.de
as of version 2.1 GFTB 200
WEEE-Reg.-Nr. DE 93889386
Operating manual
Precision Hygro-/Thermo-/Barometer
with alarm function
Please carefully read these instructions before use!
Please consider the safety instructions!
Please keep for future reference!
H62.0. .6C-03 Operating manual GFTB 200 page 2 of 12 21
_____________________________________________________ _____________________________________________________________________________
Index
1 GENERAL NOTE ...................................................................................................................................................... 2
2 SAFETY ...................................................................................................................................................................... 3
2.1 I ....................................................................................................................................................... 3 NTENDED USE
2.2 S ................................................................................................................................ 3 AFETY SIGNS AND SYMBOLS
2.3 S .............................................................................................................................................. 3 AFETY GUIDELINES
2.4 S .................................................................................................................................................. 4 COPE OF SUPPLY
2.5 O .............................................................................................................. 4 PERATION AND MAINTENANCE ADVICE
3 HANDLING ................................................................................................................................................................ 4
3.1 D ............................................................................................................................................... 4 ISPLAY ELEMENTS
3.2 P ....................................................................................................................................................... 4 USHBUTTONS
3.3 S ....................................................................................................................................................... 5 WITCHING ON
3.4 R .................................................................................................................................... 5 UNNING MEASUREMENTS
3.5 C ................................................................................................................................ 5 HOICE OF MEASURING UNIT
3.6 D -/ - .............................................................................................................. 6 ISPLAY OF MIN MAX VALUE MEMORY
3.7 H ................................................................................................................................................. 6 OLD – FUNCTION
4 DESCRIPTION OF MEASUREMENT VALUES .................................................................................................. 6
4.1 A ............................................................................................................................................ 6 BSOLUTE PRESSURE
4.2 T ....................................................................................................................................................... 6 EMPERATURE
4.3 R ............................................................................................................................................. 7 ELATIVE HUMIDITY
4.4 D .................................................................................................................................... 7 EW POINT TEMPERATURE
4.5 W ..................................................................................................................................... 7 ET BULB TEMPERATURE
4.6 S ............................................................................................................................................... 7 PECIFIC HUMIDITY
4.7 A ............................................................................................................................................ 7 BSOLUTE HUMIDITY
5 ADDITIONAL FUNCTIONS AND INFORMATION ........................................................................................... 8
5.1 H ................................................................................................................... 8 IDING UNWANTED DISPLAY VALUES
5.2 M ......................................................................................................................................... 8 EASURING RATE RATE
6 SYSTEM MESSAGES ............................................................................................................................................... 8
7 CONFIGURATION OF THE DEVICE ................................................................................................................... 9
8 OFFSET- (ZERO POINT) AND SLOPE ADJUSTMENT .................................................................................. 10
9 INTERFACE............................................................................................................................................................. 11
9.1 S ..................................................................................................................... 11 ELECTION OF BASE ADDRESS ADR.
9.2 C PC, S ........................................................................................................................ 11 ONNECTION TO OFTWARE
10 ................................................................................................................................................................. 11 ALARM
11 USTMENT SERVICE ........................................................................................ 11 ACCURACY CHECK / ADJ
12 RESHIPMENT AND DISPOSAL ....................................................................................................................... 11
13 SPECIFICATION ................................................................................................................................................. 12
1 General Note
Read this document carefully and get used to the operation of the device before you use it. Keep this
document within easy reach near the device for consulting in case of doubt.
The manufacturer will assume no liability or warranty in case of usage for other purpose than the intended
one, ignoring this manual, operating by unqualied sta as well as unauthorized modications to the device.
The manufacturer is not liable for any costs or damages incurred at the user or third parties because of the
usage or application of this device, in particular in case of improper use of the device, misuse or malfunction
of the connection or of the device.
The manufacturer is not liable for misprints.
H62.0. .6C-03 Operating manual GFTB 200 page 3 of 12 21
_____________________________________________________ _____________________________________________________________________________
2 Safety
2.1 Intended u se
The GFTB 200 measures the absolute air pressure, relative humidity, temperature and further derived units
in ambient air. The air and temperature measurement is done by precision sensors in the probe tube that
have to be protected from any dirt.
The additional units including „dew point temperature Td‟, „wet bulb temperature Twb‟, „absolute air humidity
[g/m3]‟ and „specic humidity [g/kg]‟ provide a precise and clear display of the current state of ambient air.
Due to the low power consumption, the device can be run permanently, for example as “weather station” or
“humidity monitor with acoustic alarm”.
The safety requirements (see below) have to be observed.
The device must be used only according to its intended purpose and under suitable conditions.
Use the device carefully and according to its technical data (do not throw it, strike it, etc.)
Protect the device from dirt.
Possible application areas include server rooms museums, churches administrative and residential buildings,
storage rooms, green houses, pools, production rooms, cooling and air-conditioning technology,
construction/building physics/defect assessment and many more.
2.2 Safety signs and symbols
Warnings are labeled in this document with the followings signs:
Caution! This symbol warns of imminent danger, death, serious injuries
and signicant damage to property at non-observance.
Attention! This symbol warns of possible dangers or dangerous
situations which can provoke damage to the device or environment at
non-observance.
Note! This symbol point out processes which can indirectly inuence
operation or provoke unforeseen reactions at non-observance.
2.3 Safety guidelines
This device has been designed and tested in accordance with the safety regulations for electronic devices.
However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures
and special safety advises given in this manual will be adhered to when using the device.
1. Trouble-free operation and reliability of the device can only be guaranteed if the device is not subjected
to any other climatic conditions than those stated under “Specification”.
If the device is transported from a cold to a warm environment condensation may cause in a failure of the
function. In such a case make sure the device temperature has adjusted to the ambient temperature
before trying a new start- . up
2. If there is a risk whatsoever involved in running it, the device has to be switched o
immediately and to be marked accordingly to avoid re-starting.
Operator safety may be a risk if:
- there is visible damage to the device
- the device is not working as specied
- the device has been stored under unsuitable conditions for a longer time.
In case of doubt, please return device to manufacturer for repair or maintenance.
3. When connecting the device to other devices the connection has to be designed most thoroughly as
internal connections in third-party devices (e.g. connection GND with protective earth) may lead to
undesired voltage potentials that can lead to malfunctions or destroying of the GFTB 200 and the
connected devices.
Produktspecifikationer
| Varumärke: | Greisinger |
| Kategori: | Inte kategoriserad |
| Modell: | GFTB 200 |
Behöver du hjälp?
Om du behöver hjälp med Greisinger GFTB 200 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Greisinger Manualer
17 September 2024
17 September 2024
17 September 2024
1 September 2024
31 Augusti 2024
30 Augusti 2024
30 Augusti 2024
28 Augusti 2024
27 Augusti 2024
27 Augusti 2024
Inte kategoriserad Manualer
- LONQ
- Miomare
- Pyle
- Osram
- Leynew
- PcDuino
- Tacklife
- AYA
- Overade
- Kensington
- Weber
- Epiphan
- Livington
- Selec
- JIMMY
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025