Hager TXA661A Bruksanvisning
Läs gratis den bruksanvisning för Hager TXA661A (3 sidor) i kategorin Dimmer. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 10 recensioner. Har du en fråga om Hager TXA661A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
6LE000384C
z
TYA661..
Dimmer 1gang
TXA661..
Dimmer 1gang
6LE000384C1
Safety instructions
Electrical equipment may only be installed and
assembled by a qualied electrician in accord-
ance with the relevant installation standards,
guidelines, regulations, directives, safety and
accident prevention regulations of the country.
Failure to comply with these instructions may
result in damage to the device, re or other
hazards.
Hazard due to electric shock. Disconnect be-
fore working on the device or replacing illumi-
nants. Take into account all circuit breakers
that supply dangerous voltages to the device.
Hazard due to electric shock. The device is not
suited for safe disconnection of the mains sup-
ply. Even when the device is switched off, the
load is not galvanically separated from the
mains supply.
Hazard due to electric shock on the SELV or
PELV installation. Do not connect any loads for
low voltage SELV, PELV or FELV together.
Do not connect any LED or compact uores-
cent lamps that are not expressly suitable for
dimming. The device could get damaged.
Do not connect lights with integrated dimmer.
Do not connect capacitive load and inductive
loads together on the output.
The permissible maximum load per device
must not be exceeded.
These instructions are an integral component
of the product and must be retained by the end
user.
Design and layout of the device
(1)
(2)
(3) (4)
(5)
(6)
(7)
(8)
(9)
(10)
Figure 1: Device overview
(1) Slide switch auto/min/max/manu
(2) Illuminated button for dimming mode
(3) KNX bus connection terminal
(4) Connection of load
(5) Labelling eld with cover
(6) Illuminated programming button
(7) Operation button for manual operation with
status LED
(8) Control LED short-circuit and overload pro-
tection
(9) Control LED overheating protection
(10) Mains connection
Function
System information
This device is a product of KNX system and corre-
sponds to the KNX guidelines. Detailed specialised
knowledge obtained from KNX training courses
is required for comprehension. The planning,
installation and commissioning of the device is
carried out with the help of KNX-certied software.
Systemlink start-up:
The function of the device is software-depend-
ent. The software is to be taken from the product
database. You can nd the latest version of the
product database, technical descriptions as well as
conversion and additional support programmes on
our website.
Easylink start-up:
The function of the device is conguration-de-
pendent. The conguration can also be done using
devices developed specially for simple setting and
start-up.
This type of conguration is only possible with
devices of the easylink system. Easylink stands for
easy, visually supported start-up. Precongured
standard functions are assigned to the in/outputs
by means of a service module.
Functional description
The device has a load output. It works with auto-
matic load detection depending on the connected
load in the phase cut-on or phase cut-off and ena-
bles switching and dimming via the KNX bus of:
- Incandescent lamps and halogen lamps
- Low-voltage halogen lamps with conventional
or electronic transformer
- dimmable LED and energy-saving lamps
Additionally, the device has a learn function for
more efcient control of energy-saving lamps and
230 V LED lamps.
Correct use
- Dimming of electrical loads AC 230 V.
- Installation on DIN rail according to DIN EN
60715 in distribution box.
Product characteristics
- Status display of the output on the device
- Manual activation of the output on the device
possible, building site operation
- Automatic load detection
- Setting the minimum and maximum dimming
value
- Timer functions
- Scene function
- Forced position by higher-level controller
Short-circuit and overload protection
Short-circuit and overload are signalled via the
control LED (8). The load is throttled (see Trouble-
shooting).
Overheating protection
Overheating of the device is signalled by a perma-
nent light of the control LED (9). The connected
load is throttled (see Troubleshooting).
z
Produktspecifikationer
| Varumärke: | Hager |
| Kategori: | Dimmer |
| Modell: | TXA661A |
Behöver du hjälp?
Om du behöver hjälp med Hager TXA661A ställ en fråga nedan och andra användare kommer att svara dig
Dimmer Hager Manualer
17 Juni 2025
13 December 2024
31 Augusti 2024
20 Augusti 2024
19 Augusti 2024
13 Augusti 2024
4 Augusti 2024
3 Augusti 2024
Dimmer Manualer
- Handson
- Fibaro
- Ehmann
- Gira
- Schneider Electric
- Merten
- Cotech
- Paladin
- GE
- Eurolite
- Steinel
- Trust
- Chacon
- TP Link
- InterBar
Nyaste Dimmer Manualer
12 September 2025
12 September 2025
10 September 2025
10 September 2025
10 September 2025
10 September 2025
9 September 2025
30 Augusti 2025
27 Augusti 2025
27 Augusti 2025