Hager WGCXL132AS Bruksanvisning

Hager ej kategoriserat WGCXL132AS

Läs nedan 📖 manual på svenska för Hager WGCXL132AS (3 sidor) i kategorin ej kategoriserat. Denna guide var användbar för 4 personer och betygsatt med 4.9 stjärnor i genomsnitt av 2.5 användare

Sida 1/3
2
Information for electricians
Installation and electrical connection
DANGER!
Touching live parts can result in an electric shock.
An electric shock can lead to death.
Disconnect the connecting cables before working on the device and
cover all live parts in the area!
Preparing the device for installation
(for example 16AX 2gang 1way switch)
Rockers
Frame
Notches
1
Carefully loosen the frame on the notches with a at-blade screwdriver. Lift up and
remove the frame ( ).1
Remove the rockers also with a at-blade screwdriver.
Connecting the device
L
N
C
L1
NN
LL
2A
1way switch
General
circuit diagram
1gang 1way
switch
2gang 1way
switch
1way
3
L
L
N
C
C
L2
L2
L1
L1
N
L
N
C
L1
L2
C
L1
L2
2way switch
General circuit diagram
1gang 2way
switch
2gang 2way
switch
2B
1gang 2way
switch
2way
2way
L
N
C
L1
L1 1 1
2
2
L2 L2
C
L
N
Intermediate switch
General circuit diagram
Intermediate
switch
1gang 2way
switch
1gang 2way
switch
2C
2way
2way
Intermediate
Strip connection cables approx. 10 ... 12 mm.
Wire the switch according to the appropriate wiring diagram ( ).2A 2B 2C or or
4
Installing the device into the wall box
(for example “16AX 2gang 1way switch”)
3
After wiring, x the device with the two screws attached into the wall box ( ).3
Assembling the rockers and frame
(for example “16AX 2gang 1way switch”)
Rockers
4
Frame
Fix the rockers and frame onto the device ( ).4
2-5gang frames are available for multiple combinations.

Produktspecifikationer

Varumärke: Hager
Kategori: ej kategoriserat
Modell: WGCXL132AS

Behöver du hjälp?

Om du behöver hjälp med Hager WGCXL132AS ställ en fråga nedan och andra användare kommer att svara dig