Haws 8309WC Bruksanvisning
Haws
ej kategoriserat
8309WC
Läs gratis den bruksanvisning för Haws 8309WC (5 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 1.5 recensioner. Har du en fråga om Haws 8309WC eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
10/17 Model 8309WC Page 1 of 5
1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424
E-mail: haws@hawsco.com website: www.hawsco.com
No. 2067461(21)
LIMITED WARRANTY
HAWS warrants that this specific product is guaranteed against defective material or poor
workmanship for a period of one year from date of shipment. HAWS liability under this
warranty shall be discharged
by furnishing without charge F.O.B. HAWS Factory any
goods, or part thereof, which shall appear to the Company upon inspection to be of
defective material or not of first class workmanship, provided that claim is made in writing to
Haws within a reasonable period after receipt of the product. Where claims for defects are
made, the defective part or parts shall be delivered to the Company, prepaid, for inspection.
HAWS will not be liable for the cost of repairs, alterations or replacements, or for any
expens
e connected therewith made by the owner or his agents, except upon written
authority from HAWS, Sparks, Nevada. HAWS will not be liable for any damages caused by
defective materials or poor workmanship, except for replacements, as provided above.
Buyer agrees that Haws has made no other warranties either expressed or implied in
addition to those above stated, except that of title with respect to any of the products or
equipment sold hereunder and that HAWS shall not be liable for general, special, or
consequential damages claimed to arise under the contract of sale.
The emergency equipment manufactured by HAWS is warranted to function if installation
and maintenance instructions provided are adhered to. The units also must be used for the
purpose for which they were intended. This product is intended to supplement first-aid
treatment. Due to widely varying conditions, Haws cannot guarantee that the use of this
emergency equipment will prevent serious injury or the aggravation of existing or prior
injuries.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED, PROVIDED
OR GIVEN BY HAWS.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL, PLEASE CALL:
TECHNICAL SUPPORT: 1-800-766-5612
FOR CUSTOMER SERVICE: 1-888-640-4297
Model 8309WC Barrier Free
Shower & Eye/Face Wash
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
INSTALLATION, OPERATION
&
MAINTENANCE
INSTRUCTIONS
10/17 Model 8309WC Page 2 of 5
LOCATION OF UNIT: The Model 8309WC Barrier Free Emergency Shower should
be installed in close proximity to potential accident areas. It should be clearly
identified, free
from obstructions and easy to access.
SUPPLY LINE: The minimum recommended line size is 1-1/4” IPS with 30-90 psi
(2-6 ATM) flowing pressure. Where sediment or mineral content is a problem, an inlet
recommended.
PLUMBING CONNECTIONS: Inlet supply is 1-1/4” IPS. Waste outlet is 1-1/4” IPS.
INSTALLATION PROCEDURE
Refer to Installation drawing for parts list to insure all required parts are included. Use
pipe joint sealant PST #565 (clarification. Check Loctite) on all connections.
STEP 1: Prepare the emergency shower foundation by using the floor flange
assembly as a template. Locate the three holes for the 3/8-16 UNC x 6"
anchor bolts (not supplied). They should extend 1" above the floor level.
STEP 2: Once the concrete foundation is ready (dry), assemble the floor flange
assembly to the anchor bolts; then securely fasten with 3/8-16 UNC Hex
Nuts and 3/8" washers (not supplied). Seal and tighten floor flange and tee
making certain the waste tee is facing the proper location and the foot
control holes are facing side to side.
STEP 3: Assemble nipple (1-1/4” x 19”) to the floor flange assembly and tighten
with a pipe wrench.
STEP 4: Assemble the eyewash loop assembly to the 19” nipple from step three.
Connect the pipe wrench to the galvanized nipple between the two tees to
avoid damage.
STEP 5: Assemble in the following order:
Attach nipple (1-1/4” x 28-3/4”) and tee (1-1/4”) onto the loop assembly.
Attach nipple (1-1/4” x 25”) onto the tee.
Attach tee (1-1/4” x 1-/14” x 1”) onto nipple.
Attach valve assembly onto tee.
Assemble the street elbow (1”) onto nipple (1” x 21”).
Attach nipple onto valve.
STEP 6: Assemble showerhead onto street elbow (1”).
STEP 7: Assemble the sign onto the unit. Use the strap, screws, washers and nuts
provided, to mount the sign onto the upright. The sign should be
positioned for maximum visibility.
STEP 8: Insert the galvanized plug into the optional supply line tee that is not used.
Before connecting the supply water line to the emergency shower, FLUSH
THE LINE THOROUGHLY.
Produktspecifikationer
| Varumärke: | Haws |
| Kategori: | ej kategoriserat |
| Modell: | 8309WC |
Behöver du hjälp?
Om du behöver hjälp med Haws 8309WC ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Haws Manualer
9 September 2025
9 September 2025
9 September 2025
9 September 2025
24 Augusti 2025
ej kategoriserat Manualer
- QNAP
- Keeley
- Olivetti
- Generac
- Gigabyte
- Energizer
- Cosylife
- GUS
- NovaStar
- AdHoc
- Guzzanti
- Irradio BelAir
- DOCtron
- ProfiCook
- Trisa
Nyaste ej kategoriserat Manualer
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025
9 September 2025