Honeywell TH1010D2000/U Bruksanvisning

Honeywell Termostat TH1010D2000/U

Läs gratis den bruksanvisning för Honeywell TH1010D2000/U (24 sidor) i kategorin Termostat. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 5.5 recensioner. Har du en fråga om Honeywell TH1010D2000/U eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/24
Package Includes:
T1 Pro Thermostat
UWP™ Mounting System
Decorative Cover Plate
Screws and Anchors
2 AA Batteries
Thermostat Literature
T1 Pro
Non-Programmable
Thermostat
Installation Instructions
+
Heat
Menu
Fan Auto
TH1110D2009,
TH1010D2000,
Read before installing
Optional Cover Plate installation
NOTE: If Optional Cover Plate is not
required, see “UWP Mounting System
installationon next page.
Use the Optional Cover Plate when
you need to cover paint gap from old
thermostat.
There are different cover plates
depending on when the thermostat was
manufactured.
For the square cover plate:
1. Separate the Cover Plate from
Mounting Plate.
2. Mount the Mounting Plate on to the
wall using any of the 8 screw holes.
Insert and tighten mounting screws
supplied with Cover Plate Kit. Do not
overtighten. See Figure 2. Make sure
the Mounting Plate is level.
3. Attach the UWP by hanging it on the
top hook of the Mounting Plate and
then snapping the bottom of the UWP
in place. See Figure 3.
4. Snap the Cover Plate onto the
Mounting Plate. See Figure 4.
Use supplied
screws and
wall anchors
4
32
1


Produktspecifikationer

Varumärke: Honeywell
Kategori: Termostat
Modell: TH1010D2000/U

Behöver du hjälp?

Om du behöver hjälp med Honeywell TH1010D2000/U ställ en fråga nedan och andra användare kommer att svara dig