Hotpoint WMUD 942B Bruksanvisning

Hotpoint tvättmaskin WMUD 942B

Läs gratis den bruksanvisning för Hotpoint WMUD 942B (16 sidor) i kategorin tvättmaskin. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 1.5 recensioner. Har du en fråga om Hotpoint WMUD 942B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/16

English,1

Contents

Installation, 2-3-4-5

Unpacking and levelling

Connecting the electricity and water supplies

The first wash cycle

Technical data

Description of the washing machine, 6-7

Control panel

Display

Running a wash cycle, 8

Wash cycles and functions, 9

Table of wash cycles

Wash functions

Detergents and laundry, 10

Detergent dispenser drawer

Preparing the laundry

Special wash cycles

Load balancing system

Precautions and tips, 11

General safety

Disposal

Opening the porthole door manually

Care and maintenance, 12

Cutting off the water or electricity supply

Cleaning the washing machine

Cleaning the detergent dispenser drawer

Caring for the door and drum of your appliance

Cleaning the pump

Checking the water inlet hose

Troubleshooting, 13-14

Assistance, 15-16

WMUD 942

Instructions for use

WASHING MACHINE

Installation

Levelling your appliance correctly will provide it with sta-

bility and avoid any vibrations, noise and shifting during

operation. If it is placed on a fitted or loose carpet, adjust

the feet in such a way as to allow enough room for ventila-

tion beneath the washing machine.

Electric and water connections

Connecting the water inlet hose

1. Connect the supply pipe

by screwing it to a cold

water tap using a 3/4 gas

threaded connection (see

figure).

Before performing the con-

nection, allow the water to

run freely until it is perfectly

clear.

2. Connect the other end of

the water inlet hose to the

washing machine,

screwing it onto the applian-

ce’s cold water inlet, situated

on the top right-hand side

on the rear of the appliance

(see figure).

3. Make sure there are no kinks or bends in the hose.

! The water pressure at the tap must be within the values

indicated in the Technical details table (on the page 5).

! If the water inlet hose is not long enough, contact a spe-

cialist store or an authorised serviceman.

! Ensure that the supply taps are allowing water through.

Old taps may seize in the closed position and thus pre-

vent water reaching the machine.

! Never use second-hand or old inlet hoses; use the pro-

ducts supplied with the machine.

! Keep this instruction manual in a safe place for future refe-

rence. Should the appliance be sold, transferred or moved,

make sure the instruction manual accompanies the washing

machine to inform the new owner as to its operation and

features.

! Read these instructions carefully: they contain vital infor-

mation on installation, use and safety.

Unpacking and levelling

Unpacking

! This is a separate part of

the polystyrene base and

should be removed with

the base.

! IMPORTANT check

when unpacking your

machine.

1. Unpack the washing machine.

2. Check whether the washing machine has been dama-

ged during transport. If this is the case, do not install it and

contact your retailer.

3. Remove the 4 protective

screws and the rubber bush

with the respective spacer,

situated on the rear of the

appliance (see also the

installation leaflet).

4. Seal the gaps using the plastic plugs provided.

5. Keep all the parts: you will need them again if the wa-

shing machine needs to be moved to another location.

! Packaging materials are not children’s toys.

Levelling

Your machine may make a

considerable amount of noise

if the two front feet have not

been adjusted correctly.

1. Install the washing ma-

chine on a flat sturdy floor,

without resting it up against

walls, furniture cabinets or

other.

2. If the floor is not perfectly level, compensate for any

unevenness by tightening or loosening the adjustable front

feet (see figure); the angle of inclination, measured accor-

ding to the worktop, must not exceed 2°.

Produktspecifikationer

Varumärke:	Hotpoint
Kategori:	tvättmaskin
Modell:	WMUD 942B
Inbyggd display:	Ja
Bredd:	595 mm
Djup:	605 mm
Höjd:	850 mm
Energieffektivitetsklass (gammal):	A++
Ljudnivå (tvätt):	53 dB
Maximal centrifugeringshastighet:	1400 RPM
Cykeltid (max):	195 min
Justerbara fötter:	Ja
Tvättprogram:	Hygiene/anti-allergy, Black, Cotton, Eco, Hand/wool, Quick, Synthetics, Delicate/silk
Nominell kapacitet:	9 kg
Vattenkapacitet:	Kall
Produktens färg:	Svart
Skärmtyp:	LCD
Kontrolltyp:	Knappar
Årlig vattenförbrukning tvätt:	12254 l
Apparatens placering:	Fristående
Laddning:	Frontmatad
Drum volym:	62 l
Dörr färg:	Svart
Fördröjd start timer:	Ja
Centrifugering klass:	B
Ljudnivå (spinn):	75 dB
Justerbar centrifugeringshastighet:	Ja
Vattenförbrukning per omgång:	- l
Energiförbrukning vid tvätt:	1.36 kWh
Återstående tidindikering:	Ja
Barnsäkert:	Ja
Lastbalansering systemet:	Ja
Restfukt:	62 %
Årlig energiförbrukning tvätt:	245 kWh
Strömförbrukning i avslaget läge:	0.5 W
Extrasköljning:	Ja