Kenwood Excelon CA-GRL98SG Bruksanvisning
Läs gratis den bruksanvisning för Kenwood Excelon CA-GRL98SG (2 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om Kenwood Excelon CA-GRL98SG eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new product.
© 2023 JVCKENWOOD Corporation
CA-GRL98SG
FAIRING METAL MESH SPEAKER GRILLES DESIGNED AND ENGINEERED
FOR 1996-2013 HARLEY-DAVIDSON® FLH MODEL MOTORCYCLES
INSTRUCTION MANUAL
JVCKENWOOD Corporation
Important Notes
©2023 JVCKENWOOD Corporation. All Rights Reserved. KENWOOD® and eXcelon®
are registered trademarks of JVCKENWOOD Corporation. Harley-Davidson®, Electra
Glide®, Road Glide®, Street Glide®, Ultra Classic®, Tri Glide®, CVO™, Screamin Eagle®
and Tour-Pak® are trademarks or registered trademarks of Harley-Davidson, Inc. and/
or its affiliates and if used or implied are for reference only. There is no affiliation
between Harley-Davidson, Inc. and/or its aliates and JVCKENWOOD Corporation
and/or its aliates. All other trademarks are the property of their respective owners.
Specications subject to change without notice.
Fairing Metal Mesh Speaker Grilles Installation
Instructions
NOTE: The mesh parts in this kit are designed to replace the
front speaker grille cloth on 1996-2013 HD Street Glides,
Ultras, Classics, and Standards.
Installation procedure
1. Remove your outer fairing.
NOTE: A towel or something similar is suggested to be placed over your front fender to
help in preventing dings or scratches during installation.
2. Remove the speaker/grille assembly from the bike.
NOTE: The factory grille cloth is glued to a plastic mesh, and together, is two-way taped to
the main body of the grille assembly. You can usually peel away the mesh from the body
of the grille by hand. With the factory grille cloth/mesh o, you should see the exposed
two-way tape used to hold the factory mesh on the main grille body. In most cases,
the factory two-way tape will hold the new mesh in place, but the new two-way tape
is supplied in the box if you need it (most adhesives work best at room temperature or
higher).
3. Take a moment and ensure the new mesh is oriented so everything lines up properly
and then re-install the speaker/grille assembly into the fairing.
NOTE: For custom applications, the metal mesh is thick enough that
it should not warp during powder coating, polishing, chroming, or
other similar processing.
For updated information (the latest Instruction Manual, etc.),
please visit the following website:
https://manual.kenwood.com/en_contents/search/
Produktspecifikationer
| Varumärke: | Kenwood |
| Kategori: | högtalare |
| Modell: | Excelon CA-GRL98SG |
Behöver du hjälp?
Om du behöver hjälp med Kenwood Excelon CA-GRL98SG ställ en fråga nedan och andra användare kommer att svara dig
högtalare Kenwood Manualer
24 September 2025
24 September 2025
24 September 2025
24 September 2025
24 September 2025
24 September 2025
24 September 2025
24 September 2025
24 September 2025
24 September 2025
högtalare Manualer
- Triangle
- Vivanco
- Midland
- Hertz
- Antec
- Real-El
- Alfatron
- Worx
- Caliber
- NUX
- Etekcity
- Lilliput
- AQL
- OK
- Furuno
Nyaste högtalare Manualer
24 September 2025
23 September 2025
23 September 2025
23 September 2025
23 September 2025
22 September 2025
22 September 2025
21 September 2025
21 September 2025
21 September 2025