Kramer TP-590R Bruksanvisning
Kramer
AV förlängare
TP-590R
Läs gratis den bruksanvisning för Kramer TP-590R (4 sidor) i kategorin AV förlängare. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 4 recensioner. Har du en fråga om Kramer TP-590R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4

TP TP-590T, -590R Quick Start
P/N:
2 9 0 0 - 3 0 1 4 2 4 QS
Rev:
1
Scan for full manual
TP TP- 590T and -590R Quick Start Guide
This guide helps you install and use your TP-590T and TP-590R for the first time.
Go to www.kramerav.com/downloads/TP-590T and/or www.kramerav.com/downloads/TP-590R to
download the latest user manual and check if firmware upgrades are available.
Step 1: Check in the b what’s ox
TP- 4K HDMI/USB Transmitter590T OR
TP- 4K HDMI/USB Receiver590R
1 Bracket set
1 Power cord
4 Rubber feet
1 Quick start guide
Step 2: Get to know your -590T and -590R TP TP
TP- 590T
#
Feature
Function
1
HOST USB 2.0 Connector
Connect to the USB host, (for example, a laptop) to communicate with the USB
peripheral devices (for example, a smart board) connected to USB device ports on
either the transmitter or the receiver.
2
ACTIVE HOST LED
Lights orange when the device is enabled as an active USB host (see Step 4:
Connect inputs and outputs).
3
IN LED
Lights blue when an active HDMI input signal is detected HDMI IN. on
4
OUT LED
Lights blue when an output device is connected to the receiver.
5
LINK LED
Lights green when the HDBT active link connection is established.
6
ON LED
Lights green when the device receives power.
7
HDBT OUT RJ-45 Connector
Connect to the HDBT IN -45 connector on the receiver. RJ
8
HDMI IN Connector
Connect to the HDMI source.
9
USB 2.0 Charging Connectors (3)
Connect to the USB local peripheral devices (for example, mic a keyboard, a , a
mouse and so on ).
10
RS-232 3-pin Terminal Block
Connect to a controller device (for example, ) to control a remote device via RC-306
serial connection (for example, the PTZ USB camera that is connected to the
receiver).
11
IR 3.5mm Mini Jack Connector
Connect to an external IR emitter to control a local -controlled device from the IR
receiver side (for example, TP-590R).
Connect to an IR sensor to control a remote -controlled device connected to the IR
receiver side (for example, TP-590R).
12
SETUP 4-way DIP-switch
Sets the device behavior (see Step 4: Connect inputs and outputs).
13
5V DC Power Connector
Connect to the power supply.

TP-590R
#
Feature
Function
14
ACTIVE HOST LED
Lights orange when the device is enabled as an active USB host (see Step 4:
Connect inputs and outputs).
15
IN LED
Lights blue when an active HDMI input signal device is detected on . HDBT IN
16
OUT LED
Lights blue when an output device is connected to the HDMI OUT.
17
LINK LED
Lights green when the HDBT active link connection is established.
18
ON LED
Lights green when the device receives power.
19
HD RJBT IN - Connector 45
Connect to the HDBT OUT -45 connector on the HDBT transmitter. RJ
20
HDMI OUT Connector
Connect to the HDMI acceptor.
21
HOST USB 2.0 Connector
Connect to the USB host (for example, a room PC) to communicate with the USB
peripheral devices (for example, a room camera) connected to USB device ports on
either the transmitter or the receiver.
22
USB 2.0 Charging Connectors (3)
Connect to the USB local peripheral devices (for example, USB camera, a
soundbar, speakers and so on).
23
RS- 3-pin Terminal Block232
Connect to a serial device to be controlled.
24
IR 3.5mm Mini Jack Connector
Connect to an external IR emitter to control a local -controlled device from the IR
transmitter side (for example, TP-590T).
Connect to an IR sensor to control a remote -controlled device connected to the IR
transmitter side (for example, TP-590T).
25
SETUP 4-way DIP-switch
Sets the device behavior (see ). Step 4: Connect inputs and outputs
26
5V DC Power Connector
Connect to the power supply.
The terms HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Step 3: Mount -590T and -590R TP TP
Install and using one of the following methods: TP-590T TP-590R
• Attach the rubber feet and place the unit on a at surface.
• Fasten a bracket (included) on each side of the unit and attach it to a at surface
(see and/or ). www.kramerav.com/downloads/TP-590T www.kramerav.com/downloads/TP-590R
• Mount the unit in a rack using the recommended rack adapter
(see and/or www.kramerav.com/product/TP-590T
www.kramerav.com/product/TP-590R).
• Ensure that the environment (e.g., maximum ambient temperature &
air ow) is compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
• Maximum mounting height for the device is 2 meters.

Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your and . TP-590T TP-590R
Wiring the RJ-45 Connectors
This section denes the TP pinout, using a straight pin- -pin cable with to
RJ-45 connectors.
EIA /TIA 568B
PIN
Wire Color
1
Orange / White
For HDBT cables, it is recommended that the cable ground
shielding be connected/soldered to the connector shield.
2
Orange
3
Green / White
4
Blue
5
Blue / White
To achieve specied extension distances, use the recommended
Kramer cables available at
www.kramerav.com/product/TP-590T and/or
www.kramerav.com/product/TP-590R
Using third-party cables may cause damage!
6
Green
7
Brown / White
8
Brown
Produktspecifikationer
Varumärke: | Kramer |
Kategori: | AV förlängare |
Modell: | TP-590R |
Höjd: | 52 mm |
Förpackningens bredd: | 345 mm |
LED-indikatorer: | Ja |
Videolägen som stöds: | 1080p, 2160p |
Maximal upplösning: | 4096 x 2160 pixlar |
Ljudsystem: | Stereo |
Certifiering: | WEEE, CE, RoHs |
HDCP: | Ja |
Material: | Gjuten aluminium |
Modell: | AV-mottagare |
USB-anslutning: | USB Type-A, USB Type-B |
HDBaseT-certifierad: | Ja |
Bandbredd: | 10.2 Gbit/s |
Antal HDMI-utgångar: | 1 |
RJ-45 ingångsportar: | 1 |
Strömförbrukning (mottagare) (max): | 3.6 mA |
Sändarens mått (BxDxH): | 190.5 x 59.6 x 27.4 mm |
Seriellt gränssnitt: | RS-232 |
Produktens färg: | Svart |
Antal USB-portar: | 4 |
Låddjup: | 165 mm |
Vikt inkl. förpackning: | 1000 g |
Antal per förpackning: | 1 styck |
Temperatur vid drift: | 0 - 40 ° C |
Temperaturintervall (förvaring): | -40 - 70 ° C |
Intervall för relativ operativ luftfuktighet: | 10 - 90 % |
Video ut: | 1 |
Hållbarhetscertifiering: | RoHS |
Anslutningsteknologi: | Kabel |
Nätverksansluten (Ethernet): | Ja |
Likströmsingång: | Ja |
Strömkälla av typen: | DC |
AC-adapter inkluderad: | Ja |
Max uppdateringsfrekvens: | 60 hz |
Maximal överföringshastighet avstånd: | 70 m |
Fjärrstyrd IR-utgång: | 1 |
Mottagarvikt: | 500 g |
Baudhastighet: | 115.2 Kbit/s |
Arbetsspänning (mottagare): | 5 V |
Behöver du hjälp?
Om du behöver hjälp med Kramer TP-590R ställ en fråga nedan och andra användare kommer att svara dig
AV förlängare Kramer Manualer
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
23 Juni 2025
23 Juni 2025
AV förlängare Manualer
Nyaste AV förlängare Manualer
11 Juli 2025
29 Juni 2025
21 Juni 2025
21 Juni 2025
8 Juni 2025