Lectrosonics SRc Bruksanvisning


Läs gratis den bruksanvisning för Lectrosonics SRc (36 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10.5 recensioner. Har du en fråga om Lectrosonics SRc eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/36
SRc5P & SRc
Camera Slot Dual UHF Receiver
Featuring
Digital Hybrid Wireless® Technology
INSTRUCTION MANUAL
Rio Rancho, NM, USA
www.lectrosonics.com
Fill in for your records:
Serial Number:
Purchase Date:
U.S. Patent 7,225,135
Quick Start Summary
The following checklist includes the minimum required
settings to start using the receiver.
Install either a battery sled, camera slot adapter or
other power source (see pages 9-13).
Connect power to the receiver (see pages 11, 12,
15).
Set the DIVMODE for single or dual channel opera-
tion (see page 21).
Set the COMPAT (compatibility) mode for the trans-
mitters to be used (see page 21).
Find clear operating frequencies for one or both re-
ceivers using SmartTune or manual scanning (see
pages 24, 25).
IMPORTANT:
FREQ.
WARNING
Performance will be degraded if
Receiver 2 is set 4.2 to 4.8 MHz higher
than Receiver 1. The LCD will also flash
this message periodically.
Set transmitters on the matching frequencies (see
transmitter manual).
Verify transmitters are set to the same compatibility
mode as the receiver (see transmitter manual).
Adjust transmitter input gain to match voice level
and mic position (see transmitter manual).
Adjust receiver output level as needed for the
camera or mixer input level desired (see LEVEL on
page 21).


Produktspecifikationer

Varumärke: Lectrosonics
Kategori: mottagare
Modell: SRc

Behöver du hjälp?

Om du behöver hjälp med Lectrosonics SRc ställ en fråga nedan och andra användare kommer att svara dig