Lowrance EP-10 Fuel Flow Bruksanvisning
Sidor 8 Engelska Inte kategoriserad
Läs bruksanvisningen för Lowrance EP-10 Fuel Flow gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 26 gånger. Fråga om modellen? Ställ en fråga
1
`Pub. 988-0154-431
EP-10 Fuel Flow
Electronic Sensor
Installation Instructions
This instruction manual explains how to install your EP-10 fuel flow
sensor and connect it to a NMEA 2000
network using LowranceNET
network components. You must refer to your digital gauge, sonar or
GPS unit's manual for sensor operation instructions.
Caution:
Installing LowranceNET NMEA 2000 devices is significantly
differentfrom installing earlier Lowrance components without
NMEA 2000 features. You should read all of the installation
instructions before proceeding. You should decide where to
install all components before drilling any holes in your vessel.
Some sonar or GPS units may require a software upgrade to display
NMEA 2000 data correctly and a manual addendum describing how to
operate the sensor. You can download these free and get additional
information on the NMEA 2000
compatible LowranceNET system at
our web site, .www.lowrance.com
WARNING:
Do not use this sensor with diesel engine fuel systems.
The EP-10 is designed only for gasoline engines. Please
see fuel filter warning on page 4 for additional
information.
The EP-10 Fuel Flow sensor.
Blue female NMEA
2000 connector
Sensor
module
Produktspecifikationer
| Varumärke: | Lowrance |
| Kategori: | Inte kategoriserad |
| Modell: | EP-10 Fuel Flow |
Behöver du hjälp?
Om du behöver hjälp med Lowrance EP-10 Fuel Flow ställ en fråga nedan och andra användare kommer att svara dig