Maxwell MX-25109 Bruksanvisning

Maxwell Multimeter MX-25109

Läs gratis den bruksanvisning för Maxwell MX-25109 (12 sidor) i kategorin Multimeter. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 7 recensioner. Har du en fråga om Maxwell MX-25109 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/12

U Mser anUal

Használati Utasítás

ManUal de Utilizare

Užívateľská prírUčka

DIGITAL MULTIMETER

DIGITÁLIS MULTIMÉTER

MULTIMETRU DIGITAL

DIGITÁLNY MULTIMETER

Product code / Termékkód / Cod produs / Kód produkta:

25109

User Manual

G eneral cHaracteristics

This 3½ digit multimeter is perfect for

measuring DC and AC voltage, DC current,

resistance and diode. It also has a continuity

function and can be used as a logical tester. It is

ideal for work and home use as well.

specification

1. Displaying: 22 mm digit height LCD display

2. Max. Indication: 1999 (31/2) auto polarity

indication

3. Sampling rate: approx. 3 times/ sec

4. Over Range Indication: MSD displays "1"

5. Low Battery Indication: " " symbol displays.

6. Operation Environment: (0~40)°C, relative

humidity <80%

7. Power: 9V battery (NEDA1604/6F22 or

equivalent)

8. Measurement: 145×85×30mm

(Length×Width×Height)

9. Weight: Approx. 170g (including a 9V battery)

t He front panel

1. Display

3½ digits, 7 segments, large LCD (27 × 53 mm)

2. Function and range switch

This switch selects the functions and the desired

range. It also turns the device on. To prolong

battery life set it to OFF when you are not using

the device.

3. “10A” banana (wire) connector

Connect the red (positive) measuring wire into

this connector to measure 10A current.

4. “VΩmA” banana connector

Connect the red measuring wire into this

connector to measure every kind of voltage,

resistance and current (except for 10A)

5. “COM” banana connector

Connect the black (negative) measuring wire

here.

t ecHnical data

DC voltage

Range Resolution Accuracy

200mV 100μV

±0.5% +4D

2V 1mV

20V 10mV

200V 100mV

600V 1V ±1.0% +5D

Overload protection: 600V DC

Input impedance: 1MΩ

AC voltage

Range Resolution Accuracy

200V 100mV ±1.2% +10D

600V 1V

Frequency range: 40Hz ~ 200Hz

Overload protection: 600V RMS

Input impedance: 1MΩ

3. 4.

MP 25109

20MΩ

200mV

20V

200V

200µA

20µA

600V

200kΩ

200Ω

10A

200mA

20mA

10sec MAX

FUSED

10A

COM

mAVΩ

MAX 600V

FUSED

CAT III

200mA

2mA

20kΩ

2kΩ

OFF

User Manual

Continuity test with audio signal

Range Description

A built-in beeper

signals if the

resistance is below

70±20Ω

Overload protection: 15 seconds maximum

250V DC/AC peak value

DC current

Range Resolution Accuracy

20uA 0.01μA

±1.5% +3D

200uA 0.1μA

2mA 1μA

20mA 10μA

200mA 100μA

10A 10mA ±2% +5D

Overload protection: 200mA/250V fuse and

10A/250V fuse

Max. input current: 10A (max. 6 sec.)

Resistance

Range Resolution Accuracy

200Ω 0.1Ω ±0.8% +5D

2kΩ 1Ω

±0.8% +3D20KΩ 10Ω

200KΩ 100Ω

20MΩ 10kΩ ±1.0% +15D

Max. open circuit voltage: 3.0V

Overload protection: 15 seconds maximum

250V RMS

operation

WARNING

To avoid electric shock and damage to the

device do not measure voltage exceeding 300V!

Always verify the intactness and insulation of

the measuring wires, connectors and other units

before measuring!

DC and AC voltage measuring

connector and the black one to the “COM”

connector.

voltage position. If the voltage is unknown,

set the switch to the highest available range,

connect the wires to the device and the circuit

and reduce the range until the value shown is

correct.

DC current measuring

connector and the black one to the “COM”

connector. (For measuring current between

200mA and 10A connect the red wire into the

“10A” connector).

position

serially.

use only. The measuring wire should only be

connected to the circuit for the maximum of 6

seconds and allow a few seconds in between

measurements.

Resistance measuring

connector and the black one to the “COM”

connector.

position.

Diode measuring

connector and the black one to the “COM”

connector.

” position.

of the measured diode and the black one to the

cathode.

the screen in mV-s. If the diode is closing, the

screen shows “1”.

Produktspecifikationer

Varumärke:	Maxwell
Kategori:	Multimeter
Modell:	MX-25109
Färg på produkten:	Black, Grey
Vikt:	4500 g
Bredd:	240 mm
Djup:	305 mm
Höjd:	245 mm
På / Av knapp:	Ja
Vattentankens kapacitet:	1.1 l
Mjukt grepp:	Ja
Kontinuerlig ånga version:	85 g/min
Yttersulans material/beläggning:	Aluminium zoolplaat
Maximalt ångtryck:	3 bar
Järnets kraft:	750 W
Ånga redo ljus:	Ja
Pannkraft:	1000 W