Megger AVO410 Bruksanvisning
Megger
Multimeter
AVO410
Läs gratis den bruksanvisning för Megger AVO410 (18 sidor) i kategorin Multimeter. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 6 recensioner. Har du en fråga om Megger AVO410 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/18
AVO410
Digital multimeter
Digitale Multimeter
Multimèter numérique
Multímetro digitales
Digitale multimeter
User manual
Bedienungsanleitung
Manuel utilisateur
Guía del usuario
Gebruikershandleiding
www.megger.com AVO410
3
G SAFETY WARNINGS
Safety warnings must be read and understood before instrument is used.
The following safety information must be observed to insure maximum
personal safety during the operation of this meter:
n Do not use in wet environments.
n Measurements beyond the maximum selected range must not be
attempted.
n Extreme care must be taken when measuring above 50 V, especially on
live bus-bars.
n To measure voltage, the instrument must not be switched to a current or
resistance range, or to the diode check or buzzer position.
n Circuits must be de-energised and isolated before carrying out resistance
tests.
n The rotary selector switch must only be turned after removing test
connections.
n To avoid false readings that could lead to electric shock and injury, replace
the battery as soon as the low battery indicator (
) appears.
n All external voltages must be disconnected from the instrument before
removing the battery.
n Test leads and prods must be in good order, clean, and with no broken or
cracked insulation.
n UK Safety Authorities recommend the use of fused test leads when
measuring voltage on high energy systems.
n Replacement fuses must be of the correct type and rating.
n The instrument must not be used if any part of it is damaged.
n Check for correct instrument operation by testing a known voltage before
and after use. Do not use if misleading results are obtained.
n Warnings and precautions must be read and understood before an
instrument is used. They must be observed during the operation of this
instrument.
CAT IV - Measurement category IV: Equipment connected between the origin
of the low-voltage mains supply and the distribution panel.
CAT III - Measurement category III: Equipment connected between the
distribution panel and the electrical outlets.
CAT II - Measurement category II: Equipment connected between the
electrical outlet and the user’s equipment.
Note
This instrument must only be used by suitably trained and competent
persons
Produktspecifikationer
| Varumärke: | Megger |
| Kategori: | Multimeter |
| Modell: | AVO410 |
Behöver du hjälp?
Om du behöver hjälp med Megger AVO410 ställ en fråga nedan och andra användare kommer att svara dig
Multimeter Megger Manualer
2 Augusti 2025
2 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
31 Juli 2025
Multimeter Manualer
- Laserliner
- Cosinus
- Strex
- Kyoritsu
- Dasqua
- Klein Tools
- Cablexpert
- Bearware
- Basetech
- TFA
- Multimetrix
- Heylo
- Wiha
- Owon
- Flir
Nyaste Multimeter Manualer
31 Juli 2025
31 Juli 2025
31 Juli 2025
29 Juli 2025
27 Juli 2025
24 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025