Mount-It! MI-7171 Bruksanvisning
Mount-It!
Inte kategoriserad
MI-7171
Läs gratis den bruksanvisning för Mount-It! MI-7171 (7 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 7 recensioner. Har du en fråga om Mount-It! MI-7171 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
HEAVY-DUTY UNDER DESK /
WALL CPU MOUNT
MI-7171
Please scan this QR code
to visit the product page.
Thank you for choosing Mount-It
2
3
Mount-It!
Mount-It!
Mount and Accessories
Mounting Hardware
Mount Body Horizontal Arm Protective Pads
Bolt Washer Screw Screw Concrete Anchor Hex Wrench
Missing Parts? Call us at (855) 925-5668 and we will ship replacement parts free of charge.
CHOKING HAZARD. Package includes small parts.
Not for children under 3 years. Adult supervision is required.
Check carefully to make sure there are no missing or defective parts. Some hardware provided may not
be used. Use the correct mounting hardware suitable for your installation.
DIMENSIONS & WEIGHT CAPACITY
min7.7”~
max11.7”
5.6”
min13”~max16.9”
min21.7”~max27.6”
min19.9”~max25.8”
18.9”
2.8”
0.8”
6.5”
5.9”
Rated weight capacity is 44lbs for the mount.
Caution:
Ensure all mounting surfaces are capable of
holding the weight of your mount.
DO NOT EXCEED MAXIMUM LISTED
WEIGHT CAPACITY.
SERIOUS INJURY OR PROPERTY DAMAGE
MAY OCCUR!
5.6”
3.9” 0.9”
4.5”
5.9”
2.8”
1.2” 0.6”
5.9”
4.5”
Side Mounting Bracket Top Mounting Bracket
5
4
• Attach the Horizontal Arm (#B) to the Mount Body (#A) using Bolts (#D) and Washers (#E).
Attach the Horizontal Arm
Step 2
• Widen the mount to a size larger than that of your PC by loosening the bolts shown here on the
horizontal arm, and the lower side support. To extend the length of the mount, pull and hold the ring on
the back of the mount, slide the mount to the appropriate length and release the ring. Check that it has
latched in place by trying to slide the two ends apart.
1. Loosen the bolt on the horizontal arm to adjust the length of the arm.
2. Loosen the 2 screws on the side of the base to adjust the width of the base.
3. Pull and hold the ring on the back of the mount to raise and lower the mount. Note: support the base
with one hand if the PC is inserted to prevent it from lowering too quickly.
Widen the Mount
Step 3
• Apply the Protective Pads (#C) as shown by peeling off the adhesive cover and sticking them to the
interior of the Horizontal Arm (#B).
Install the Protective Pads
Step 1
1
3
2
Produktspecifikationer
| Varumärke: | Mount-It! |
| Kategori: | Inte kategoriserad |
| Modell: | MI-7171 |
Behöver du hjälp?
Om du behöver hjälp med Mount-It! MI-7171 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Mount-It! Manualer
2 April 2025
29 Januari 2025
27 December 2024
27 December 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
Inte kategoriserad Manualer
- Orima
- Hecate
- RadonTec
- Baby Trend
- Noordi
- Dali
- Catalyst
- Sissel
- EKO
- Bang And Olufsen
- Enphase
- Vivitar
- Cambium Networks
- Gardigo
- Brockhaus HEUER
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025